Nokia 6136 User Guide
9252766
Issue 2
This device complies with Directive 2002/95/EC on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
9252766/Issue 2
Contents
For your safety.......................... 6
1. General information............. 9
Access codes............................................ 9
Nokia support and contact
information........................................... 10
Accessibility solutions ....................... 10
Copyright protection.......................... 10
Configuration settings service ........ 10
Download content and applications 11
Edit contact details............................ 48
Subscribed names............................... 50
Settings.................................................. 51
Groups.................................................... 51
Speed dialling....................................... 51
Service and my numbers................... 52
2. Get started......................... 12
SIM card and battery installation.. 12
Charge the battery.............................. 13
Memory card installation ................. 14
Turn the phone on and off............... 15
Open the fold ....................................... 15
Normal operating position............... 16
Wrist strap ............................................ 17
3. Your phone......................... 18
Keys and parts...................................... 18
Standby mode...................................... 19
Indicators and icons........................... 21
Keypad lock (keyguard) ..................... 22
8. Call log................................ 53
4. Call functions..................... 24
Make a call ........................................... 24
Speed dialling....................................... 24
Enhanced voice dialling .................... 24
Answer or reject a call....................... 25
Options during a call.......................... 25
Positioning information.................... 53
9. Settings............................... 54
Profiles................................................... 54
Themes................................................... 54
Tones....................................................... 54
Display.................................................... 55
Time and date ...................................... 57
My shortcuts ........................................ 57
Connectivity ......................................... 59
Call.......................................................... 65
Phone...................................................... 66
Enhancements ..................................... 67
5. Phone menus...................... 27
Menu views........................................... 27
Access a menu function.................... 27
6. Messaging .......................... 28
Text messages...................................... 28
SIM messages....................................... 31
4
Configuration........................................ 68 Games..................................................... 89
Security .................................................. 68 Collection............................................... 89
Restore factory settings..................... 69
Phone software updates.................... 69
11.Gallery............................... 72
Format memory card.......................... 72
12.Media ................................ 73
Camera ................................................... 73
Media player......................................... 74
Music player.......................................... 74
Browser security.................................. 96
Radio....................................................... 76
Recorder................................................. 77
Equaliser................................................. 78
17.SIM services....................... 99
Stereo widening................................... 78 18.PC connectivity.............. 100
USB data storage.............................. 100
13.Push to talk....................... 79
Nokia PC Suite................................... 100
Connect and disconnect.................... 79
EGPRS, HSCSD and CSD.................. 100
Make and receive a PTT call ............. 79
Data communication applications 100
Callback requests................................. 81
Add a one-to-one contact................ 82
PTT channels ......................................... 82 Charging and discharging.............. 102
PTT settings ........................................... 83 Nokia battery authentication
19.Battery information....... 102
guidelines............................................ 103
14.Organizer........................... 85
Alarm clock............................................ 85
Calendar................................................. 85
To-do list................................................ 86
Notes....................................................... 87
Countdown timer ................................ 87
Stopwatch ............................................. 88
Care and maintenance ........ 105
Additional safety
information.......................... 106
Index..................................... 110
15.Applications...................... 89
5
F o r y o u r s a f e t y
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may get interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any regulations or rules. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELING
Do not use the phone at a refueling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
6
F o r y o u r s a f e t y
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACKUP COPIES
Remember to make back-up copies or keep a written record of all
important information.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■ About your device
The wireless device described in this guide is approved for use on the EGSM 850,
900, 1800, and 1900 networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the phone must be switched on. Do not switch the device on when
wireless phone use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
7
F o r y o u r s a f e t y
device may also have been specially configured. This configuration may include
changes in menu names, menu order, and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as multimedia messaging service
(MMS), browsing, e-mail application, instant messaging, remote
synchronization, and content downloading using the browser or MMS, require
network support for these technologies.
■ Shared memory
The following features in this device may share memory: the Gallery, contacts,
text messages, multimedia messages, instant messages, e-mail, calendar, to-do
notes, and JavaTM games and applications. Use of one or more of these features
may reduce the memory available for the remaining features sharing memory.
For example, saving many Javaapplications may use all of the available memory.
Your device may display a message that the memory is full when you try to use a
shared memory feature. In this case, delete some of the information or entries
stored in the shared memory features before continuing. Some of the features,
such as text messages, may have a certain amount of memory specially allotted
to them in addition to the memory shared with other features.
■ Enhancements
A few practical rules about accessories and enhancements:
•
•
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
•
•
Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
Installation of any complex car enhancements must be made by qualified
personnel only.
8
G e n e r a l i n f o r m a t i o n
1. General information
Congratulations on your purchase of this Nokia mobile phone. Some of its other
features include a calendar, a clock, an alarm clock, a radio, a music player, and a
built-in camera.
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code, and to set the
phone to request the code, see ”Security,” p. 68.
If you enter an incorrect security code five times in succession, the phone ignores
further entries of the code. Wait for five minutes, and enter the code again.
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (four to eight digits) help to protect your SIM
card against unauthorized use. See ”Security,” p. 68. The PIN code is usually
supplied with the SIM card. To set the phone to request the PIN code, see
”Security,” p. 68.
The PIN2 code (four to eight digits) may be supplied with the SIM card and is
required for some functions.
The module PIN is required to access the information in the security module. See
”Security module,” p. 96. The module PIN is supplied with the SIM card if the SIM
card has a security module in it.
The signing PIN is required for the digital signature. See ”Digital signature,” p. 97.
The signing PIN is supplied with the SIM card if the SIM card has a security
module in it.
PUK codes
The personal unblocking key (PUK) code and the universal personal unblocking
key (UPUK) code (eight digits) is required to change a blocked PIN code and UPIN
code, respectively. The PUK2 code is required to change a blocked PIN2 code.
9
G e n e r a l i n f o r m a t i o n
If the codes are not supplied with the SIM card, contact your service provider for
the codes.
Call barring password
The call barring password (four digits) is required when using Call barring
service. See ”Security,” p. 68. You can obtain the password from your service
provider.
If you enter an incorrect call barring password three times in succession, the
password is blocked. Contact your service provider for assistance.
■ Nokia support and contact information
Check www.nokia.com/support for the latest version of this guide, additional
information, downloads, and services related to your Nokia product.
On the Web site, you can get information on the use of Nokia products and
services. If you need to contact customer service, check the list of local Nokia
Care contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia Care services location at
www.nokia.com/repair.
■ Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information, visit the web site at
■ Copyright protection
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred, or forwarded.
■ Configuration settings service
To use some of the network services, such as mobile Internet services, MMS, or
remote Internet server synchronization, your phone needs the correct
configuration settings. You may be able to receive the settings directly as a
configuration message. After receiving the settings, you need to save them on
your phone. The service provider may provide a PIN that is needed to save the
10
G e n e r a l i n f o r m a t i o n
settings. For more information on availability of the settings, contact your service
provider.
is displayed.
To save the settings, select Show > Save. If the phone requests Enter settings'
PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code,
contact the service provider who supplies the settings. If no settings are saved
yet, these settings are saved and set as default configuration settings. Otherwise,
the phone asks, Activate saved configuration settings?
To discard the received settings, select Show > Discard.
To edit the settings, see ”Configuration,” p. 68.
■ Download content and applications
You may be able to download content, such as themes, tones, and video clips, to
the phone (network service). Select the download function (for example, in the
Gallery menu). To access the download function, see the respective menu
descriptions.
You may also be able to download updates of phone software (network service).
See ”Phone software updates,” p. 69.
For availability of different services, pricing, and tariffs, contact your service
provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
11
G e t s t a r t e d
2. Get started
■ SIM card and battery installation
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or another vendor. Before installing
the SIM card and removing the battery, always switch the device off, and
disconnect the charger.
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
Always switch off the power, and disconnect the charger and any other device
before removing the cover. Avoid touching electronic components while
changing the cover. Always store and use the device with the cover attached.
To install the SIM card, do the following:
1. Press firmly and slide the top of the back cover
to release it; then continue sliding the back
cover to remove and lift it from the phone.
2. After you have removed the back cover, insert
2
your finger under the battery, and lift it as
shown.
3. Place a fingernail in the middle of the metal
SIM card holder. Then, unlatch and swing the
SIM card holder open.
3
4. Insert the SIM card into the holder as shown,
beveled corner first, with the gold-colored
contacts on the SIM card face up (away from
the phone).
5
4
5. Swing the SIM card holder closed. The gold-
colored contacts on the SIM card meet the
12
G e t s t a r t e d
gold-colored contacts on the inside of the phone. Gently press the SIM card
holder into the phone until it clicks into place.
6. Replace the battery by positioning it (with the
label side facing up) so the gold-colored
6
contacts match up with those on the phone.
Slide the battery in until it snaps into place.
7. Slide the back cover until it locks into place.
7
■ Charge the battery
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
This device is intended for use with the BL-4C battery. Always use original Nokia
batteries. See ”Nokia battery authentication guidelines,” p. 103.
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from the AC-4 charger.
For availability of approved enhancements, please check with your dealer.
1. Connect the charger to a standard
wall outlet.
2. Insert the charger plug into the
round jack in the bottom of the
phone. If the battery is completely
discharged, it may take a few
minutes before the charging
indicator appears on the display or
before any calls can be made.
3. Disconnect the charger from the
phone when the battery is fully charged.
13
G e t s t a r t e d
You can use the phone while the charger is connected. The charging time
depends on the charger and the battery used. For example, charging a BL-4C
battery with the AC-4 charger takes approximately 1 hour and 10 minutes while
the phone is in the standby mode.
■ Memory card installation
Use only compatible microSD cards with this device.
Other memory cards do not fit in the memory card slot
and are not compatible with this device. Using an
incompatible memory card may damage the memory card
as well as the device, and data stored on the incompatible
card may be corrupted.
Use only microSD cards approved by Nokia for use with this device. Nokia utilizes
the approved industry standards for memory cards but not all other brands may
function correctly or be fully compatible with this device.
You can use a memory card to extend the memory of the Gallery. See ”Gallery,”
p. 72. You can insert or change the memory card without turning the phone off.
Important: Do not remove the memory card in the middle of an
operation when the card is being accessed. Removing the card in the
middle of an operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
To insert the memory card, use a fingernail as a lever, place it in the recessed area
of the memory card holder and swing the holder open (1). Place the memory card
in the card holder (2). Make sure that the memory card is properly inserted and
that the gold-colored contacts on the card are facing upwards. Close the memory
card holder (3).
14
G e t s t a r t e d
You can use the memory card to save your multimedia files, such as video clips,
sound files, and images, in the Gallery.
To remove the memory card, use a fingernail as a lever, place it in the recessed
area of the memory card holder and swing the holder open. Push with a fingernail
to loosen the memory card from the holder; then, pull the card out. Close the
memory card holder.
To format the memory card, see ”Format memory card,” p. 72.
■ Turn the phone on and off
Press and hold the end key until the
phone turns on or off. If the phone asks
for a PIN, enter the code, and select OK.
Plug and play service
When you turn on your phone for the first time, and the phone is in the standby
mode, you may be asked to get the configuration settings from your service
provider (network service). Confirm or decline the query. See Connect to service
provider support in ”Configuration,” p. 68 and ”Configuration settings service,”
p. 10.
■ Open the fold
When you open the fold of the
phone, it opens up to approximately
155 degrees. Do not try to force the
fold open more.
15
G e t s t a r t e d
■ Normal operating position
Use the phone only in its normal operating
position.
Your device has an internal antenna.
Note: As with any other radio transmitting device, do not touch the
antenna unnecessarily when the device is switched on. Contact with
the antenna affects call quality and may cause the device to operate at
a higher power level than otherwise needed. Avoiding contact with the
antenna area when operating the device optimizes the antenna
performance and the battery life.
16
Y o u r p h o n e
3. Your phone
■ Keys and parts
•
•
•
•
•
•
Earpiece (1)
Main display (2)
Call key (3)
Left, middle, and right selection keys (4)
Four-way navigation key (5)
End key ends calls (short key press) and turns
phone on and off (long key press) (6)
•
Keypad (7)
•
•
•
•
•
Camera lens (8)
Mini display (9)
Loudspeaker (10)
Camera release key (11)
Memory card holder (12)
•
•
•
•
Pop-Port connectorTM (13)
Charger connector (14)
Infrared (IR) port (15)
Volume is activated by volume
down/up key (short key press), voice
dialing is activated by volume down
18
key (long key press) and Push to talk (PTT) is activated by volume up key (long
key press) (16)
■ Standby mode
When you turn on your phone, the first screen
that appears is the start screen, which indicates
your phone is in the standby mode. When your
phone is in the standby mode, the selection keys
access specific functions, and the indicators
appear on the start screen. Indicators show the
status of the phone.
•
•
•
Network signal strength (1)
Battery strength indicator (2)
Clock (3) — if the time is set to appear on the
display. See ”Time and date,” in ”Settings,” p.
57.
•
•
The name of the service provider or the
operator logo (4)
Calendar (5) — the date is displayed if it is set to appear on the display and the
active standby is not set. See ”Active standby mode,” p. 20 and ”Time and
date,” p. 57.
•
•
Active standby (6). See ”Active standby mode,” p. 20.
The left selection key (7) is Go to or a shortcut to another function. See ”Left
selection key,” p. 57.
•
•
The middle selection key (8) mode is Menu.
The right selection key (9) may be Names to access the list of contacts in the
Contacts menu, an operator specific name to access an operator specific Web
site, or a shortcut to a function that you selected. See ”Right selection key,”
p. 58.
19
Y o u r p h o n e
Active standby mode
In the active standby mode, the phone
can display separate content item
windows, such as general indicators and
an operator logo (1), shortcuts (2), audio
functions (3), and the calendar (4). To
select whether the active standby is
shown, see Active standby in ”Standby
mode settings,” p. 55.
The active standby is in passive mode
when the middle selection key (5) is
Menu; you can only view content. To
activate the navigation mode and scroll
through the content, use the navigation
key. To change the key for accessing the
navigation mode, see Enabling standby in ”Standby mode settings,” p. 55. When
the arrow indicators are shown, you can scroll the item left and right.
To personalize and organize the active standby content, select Options > Active
standby. See ”Standby mode settings,” p. 55.
To exit the navigation mode, select Exit. If no keys are pressed after a certain
period of time, the phone automatically returns to the passive mode.
Content items in navigation mode
Shortcut bar — To select a shortcut, scroll to the function you want and select it.
To change or organize the shortcuts when in the navigation mode, select
Options > Active standby > Options > Personalise, scroll to the shortcut
window, and select Options > Select links or Organise links.
Audio applications — To turn on the radio or the music player, scroll to and select
it. To change a track in the music player or a channel in the radio, scroll left or
right. To start the radio channel search, scroll and hold left or right.
Calendar — To view today’s notes, select the one you want. To view the notes for
the previous or next days, scroll left or right.
My note — To enter a note, select the content window, write your note, and save
it.
My presence — To change your presence status information, select the content
item.
20
Y o u r p h o n e
Timer — To start the countdown timer, select the content item. The remaining
time with a note is shown.
General indicators — To show standby indicators, such as date, cell info display,
info messages, PTT default group name, and closed user group index. The date is
shown if the calendar is not selected as active standby content.
Standby mode shortcuts
To access the list of dialed numbers, press the call key once. See ”Make a call,” p.
24.
To call your voice mailbox (network service) when you have saved your voice
mailbox number in the phone, press and hold 1.
To connect to a browser service, press and hold 0.
shortcuts,” p. 57.
To make a call by pressing a number key with an assigned phone number, see
”Speed dialling,” p. 24.
To toggle between the General profile to the Silent profile, press and hold #.
Power saving screen saver
To save power, a digital clock screen saver overwrites the display when no
function of the phone has been used for a certain period of time. See ”Power
saver,” in ”Main display,” p. 56 or ”Power saver,” in ”Mini display,” p. 57 for
information on activating the power screen saver.
■ Indicators and icons
Your phone has two types of identifiers: indicators and icons.
Indicators
See ”Standby mode,” p. 19 for information on indicators.
Icons
Icons are graphical representations of a specific item or situation. The following
list describes each icon.
You have unread messages in the Inbox folder.
21
Y o u r p h o n e
You have unsent, canceled, or failed messages in the Outbox folder.
The phone registered a missed call.
You have received one or several instant messages, and you are
connected to the instant messaging service.
The keypad is locked.
The alarm clock is set to On.
The phone does not ring for an incoming call or text message.
The countdown timer is running.
The stopwatch is running in the background.
The phone is registered to the GPRS or EGPRS network.
A GPRS or EGPRS connection is established.
/
/
/
The GPRS or EGPRS connection is suspended (on hold), for example, if
there is an incoming or outgoing call during an EGPRS or GPRS dial-up
connection.
When the infrared connection is activated, the indicator is shown
continuously.
If you have two phone lines, the second phone line is selected.
All incoming calls are diverted to another number.
The loudspeaker is activated, or the music stand is connected to the
phone.
Calls are limited to a closed user group.
The timed profile is selected.
A call over local access connection with a Wireless Local Network
(WLAN)/Wireless Fidelity (Wi-Fi) is active. See ”WLAN/Wi-Fi,” p. 59.
■ Keypad lock (keyguard)
The keyguard disables your keypad to prevent accidental key presses.
•
To lock the keypad, select Menu, and press * within 3.5 seconds.
22
Y o u r p h o n e
•
To unlock the keypad, select Unlock and press * within 1.5 seconds.
If the Security keyguard is set to On, enter the security code if requested.
To answer a call when the keyguard is on, press the call key. When you end or
reject the call, the keypad is automatically locked.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device. Enter the emergency number and press
the call key.
For information about Security keyguard, see ”Phone,” p. 66.
23
C a l l f u n c t i o n s
4. Call functions
■ Make a call
1. Enter the phone number, including the area code. To delete an incorrect
character, select Clear.
For international calls, press * twice for the international prefix (the +
character replaces the international access code); and then enter the country
code, the area code without the leading 0, if necessary, and the phone
number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key, or select
Options > End call.
■ Speed dialling
Assign a phone number to one of the speed dialing keys, 2 to 9. Call the number
by one of the following ways:
•
•
Press a speed dialing key, and then press the call key.
If Speed dialling is set to On, press and hold a speed dialing key until the call
is started. See Speed dialling in ”Call,” p. 65.
■ Enhanced voice dialling
You can make a phone call by saying the name that is saved in the contact list of
the phone. A voice command is added automatically to all entries in the contact
list of the phone.
Make a voice dialing call
If an application is sending or receiving data using a packet data connection, end
the application before you use voice dialing.
Voice commands are language-dependent. To set the language, see Voice
playback language in ”Phone,” p. 66.
24
C a l l f u n c t i o n s
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is
played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold
the headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition is successful, a list
with matches is shown. The phone plays the voice command of the match on
the top of the list. After about 1.5 seconds, the phone dials the number; or if
the result is not the correct one, scroll to another entry, and select to dial the
entry.
Using voice commands to carry out a selected phone function is similar to
voice dialing. See Voice commands in ”My shortcuts,” p. 58.
■ Answer or reject a call
•
Open the fold, or press the call key to answer the call. To mute the ringing
tone, select Silence, if the fold is open or if the fold is closed, press the volume
up or down key.
•
To reject an incoming call when the fold is open, press the end key.
If Divert if busy is activated in your voice mailbox, the call is forwarded to your
voice mail. If not, the call is rejected. If a compatible headset supplied with the
headset key is connected to the phone, press the headset key to answer and end a
call.
Call waiting
Call waiting is a network service. To answer the waiting call during an active call,
press the call key. The first call is put on hold. To end the active call, press the end
key.
To activate the Call waiting function, see ”Call,” p. 65.
■ Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
25
C a l l f u n c t i o n s
To increase or decrease the volume during a call, press the volume up or down key
on the side of the phone.
Select Options during a call and the following options may be available.
Send DTMF — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect yourself
Conference — to make a conference call that allows up to five persons to take
part in a conference call
Private call — to discuss privately in a conference call
Do not hold the device near your ear when the loudspeaker is in use, because the
volume may be extremely loud.
26
P h o n e m e n u s
5. Phone menus
Phone features are grouped according to function and are accessed through the
main menus of your phone. Each main menu contains submenus and lists from
which you can select or view items and customize phone features. Scroll to
access these menus and submenus.
Some menus may not be available, depending on your network. For more
information, contact your service provider.
■ Menu views
Your phone may have two types of menu views: List and Grid.
In the List interface, images introduce every menu. Scroll to navigate through the
menus. As you scroll through the menus, the menu number appears in the upper
right corner of the display. Below the menu number is a scroll bar with a tab. The
tab moves up or down as you scroll through the menus, providing a visual
representation of your current position in the menu structure.
In the Grid interface, multiple menu icons appear on a single display. Use the
four-way navigation key to scroll through the icons. The name of the menu
appears at the top of the display and the icon for the selected menu is outlined.
To change the menu view, select Options > Main menu view > List or Grid.
■ Access a menu function
1. Select Menu and the menu you want.
2. If the menu contains submenus, select the one that you want.
3. If the selected menu contains further submenus, select the one that you want
4. To return to the previous menu level, select Back. To exit the menu, select
Exit.
27
M e s s a g i n g
6. Messaging
You can use mobile messages to keep in touch with friends, family, and business
associates by using the short message service (SMS), which is a network service.
Not all messaging features are available in all wireless networks. Contact your
service provider for availability and subscription information.
When sending messages, your phone may display the words Message sent. This is
an indication that the message has been sent by your device to the message
center number programmed into your device. This is not an indication that the
message has been received at the intended destination. For more details about
messaging services, check with your service provider.
■ Text messages
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly. A message length indicator
appears at the top of the phone display. This indicator allows you to see how
many characters are left in the message as you are entering text because it
counts backwards from 913.
Characters that use accents or other marks, and characters from some language
options like Chinese, take up more space limiting the number of characters that
can be sent in a single message.
You can use predefined templates to help you write text messages. Before you
can send any text or e-mail message, you need to save some message settings.
See ”Message settings,” p. 43.
To check SMS e-mail service availability and to subscribe to the service, contact
your service provider.
Text entry
To enter text while writing messages, use traditional or predictive text input.
When using traditional text input, press a number key, 1 to 9, repeatedly until
the character you want is displayed. In predictive text input you can enter a letter
with a single key press.
28
M e s s a g i n g
When you write text,
predictive text input, and
appears at the top left of the display, indicating
is displayed, indicating traditional text input.
,
, or
is displayed next to the text input indicator, indicating the
indicates number
character case. To change the character case, press #.
mode. To change from the letter to number mode, press and hold #, and select
Number mode.
Settings
To set the writing language to a language other than that selected, select
Options > Writing language. Predictive text input is only available for the
languages on the list.
To set the predictive text input option, select Options > Prediction on, or to set
traditional text input option, select Options > Prediction off.
To quickly set predictive text input on or off when writing text, press # twice, or
select and hold Options.
Predictive text input
Predictive text input allows you to write text quickly by using the phone keypad
and a built-in dictionary.
1. Start writing a word, using the keys, 2 to 9, and press each key only once for
one letter. The word changes after each keystroke.
2. When you finish writing the word and it is correct, press 0.
3. If a displayed word is not correct, press * repeatedly, or select Options >
Matches. When the word that you want is displayed, select Use.
4. If the ? character is displayed after the word, the word you intended to write
is not in the dictionary. To add the word to the dictionary, select Spell. The
phone displays the entered letters. Enter the word (traditional text input is
used), and select Save.
Traditional text input
Press a number key, 1 to 9, repeatedly until the character you want is displayed.
Not all characters available under a number key are printed on the key. The
characters available depend on the selected writing language. See ”Settings,”
p. 29.
If the next letter you want is located on the same key as the present one, wait
until the cursor is displayed, or press any of the navigation keys, and enter the
letter.
29
M e s s a g i n g
To access the most common punctuation marks and special characters, press 1.
To insert a space, press 0.
If you want more characters, press *.
Write and send
1. Select Menu > Messaging > Create message > Text message, and enter the
recipient’s phone number in the To: field.
2. To retrieve a phone number from Contacts, select Add > Contact. To send the
message to multiple recipients, add the contacts you want one by one.
3. To send the message to persons in a group, select Contact group and the
group you want. To retrieve the contacts to which you recently sent
messages, select Add > Recently used.
4. Scroll down and enter a message. See ”Text entry,” p. 28.
5. To insert a template to the text message, select Options > Use template and
the template you want to insert.
6. To see how the message will look to the recipient, select Options > Preview.
7. To send the message, select Send.
Read and reply
When you receive messages, either 1 message received or N messages received
is displayed, where N is the number of new messages.
1. To view a new message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox. If more than
one message has been received, select the message that you want to read.
indicates an unread message in Inbox.
2. While reading a message, select Options, and delete or forward the message,
edit the message as a text message or an SMS e-mail, move it to another
folder, or view or extract message details. You can also copy text from the
beginning of the message to your phone calendar as a reminder note.
3. To reply to a message, select Reply > Text message, Multimedia, Flash
message, or Audio message.
To send a text message to an e-mail address, enter the e-mail address in the
To: field.
30
M e s s a g i n g
4. Scroll down and enter a message in the Message: field. See ”Text entry,”
p. 28. If you want to change the message type for your reply message, select
Options > Change msg. type.
5. To send the message, select Send.
■ SIM messages
SIM messages are text messages that are saved to your SIM card. You can copy or
move those messages to the phone memory, but not vice versa. Received
messages are saved to the phone memory.
To read SIM messages, select Menu > Messaging > Options > SIM messages.
■ Multimedia messages
Note: Only devices that have compatible multimedia message or e-mail
features can receive and display multimedia messages. The appearance of
a message may vary depending on the receiving device.
A multimedia message can contain text, sound, a picture, a calendar note, a
business card, or a video clip. If the message is too large, the phone may not be
able to receive it. Some networks allow text messages that include an Internet
address where you can view the multimedia message.
Multimedia messaging (network service) supports the following formats:
•
•
•
Picture: JPEG, GIF, animated GIF, and WBMP
Sound: AMR and 13K audio
Video clips: 3GPP and 3GPP2 formats or MPEG video and AMR audio or 13K
audio
The phone may not support all variations of the file formats.
You cannot receive multimedia messages during a call, a game, another Java
application, or an active browsing session over GSM data (for example, when the
phone is used as a modem to access the internet). Because delivery of multimedia
messages can fail for various reasons, do not rely solely upon them for essential
communications.
31
M e s s a g i n g
Write and send
The wireless network may limit the size of multimedia messages. If the inserted
picture exceeds this limit, the device may make it smaller so that it can be sent by
MMS.
To set the settings for multimedia messaging, see ”Multimedia,” p. 45. To check
availability and to subscribe to the multimedia messaging service, contact your
service provider.
1. Select Menu > Messaging > Create message > Multimedia.
2. Enter a message. See ”Text entry,” p. 28.
Your phone supports multimedia messages that contain several pages
(slides). A message can contain a calendar note and a business card as
attachments. A slide can contain text, one image, and one sound clip; or text
and a video clip.
3. To insert a slide in the message, select New; or select Options > Insert >
Slide.
5. Scroll down, and select Send. See ”Message sending,” p. 32.
6. Enter the recipient’s phone number in the To: field.
To retrieve a phone number from Contacts, select Add > Contact.
To send the message to multiple recipients, add the contacts you want one by
one.
To send the message to persons in a group, select Contact group and the
group you want.
To retrieve the contacts to which you recently sent messages, select Add >
Recently used.
Message sending
When you finish writing your message, to send the message, select Send, or press
the call key. The phone saves the message in the Outbox folder, and sending
starts. If you select Save sent messages > Yes, the sent message is saved in the
Sent items folder. See ”General settings,” p. 43.
32
M e s s a g i n g
Note: When the phone is sending the message, the animated
is
shown. Actual receipt of a message depends on a number of factors. For
more details about messaging services, check with your service
provider.
It takes more time to send a multimedia message than to send a text message.
While the message is being sent, you can use other functions on the phone. If an
interruption occurs while the message is being sent, the phone tries to resend the
message a few times. If these attempts fail, the message remains in the Outbox
folder. You can try to resend it later.
To cancel the sending of the messages in the Outbox folder, scroll to the desired
message, and select Options > Cancel sending.
Read and reply
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
When you receive multimedia messages, either Multimedia message received or
N messages received is displayed, where N is the number of new messages.
1. To read the message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox. In the list of
messages,
indicates an unread message. Select the message that you
want to view.
2. To view the whole message if the received message contains a presentation,
select Play.
To view the files in the presentation or the attachments, select Options >
Objects or Attachments.
3. To reply to the message, select Options > Reply > Text message, Multimedia,
Flash message, or Audio message. Write the reply message.
If you want to change the message type for your reply message, select
Options > Change msg. type. The new message type may not support all the
content that you have added.
4. To send the message, select Send. See ”Message sending,” p. 32.
33
M e s s a g i n g
Memory full
When you are receiving a message, and the memory for the messages is full,
Memory full. Unable to receive msgs. is shown. To delete old messages, select
OK > Yes and the folder. Scroll to the message you want, and select Delete.
If you want to delete more than one message at the same time, scroll to one of
the messages you want to delete and select Options > Mark. Scroll to each
additional message you want to delete and select Mark or if you want to delete
all the messages, select Options > Mark all. When you have finished marking the
messages you want to delete, select Options > Delete marked.
Folders
The phone saves received text and multimedia messages in the Inbox folder.
To set the phone to save the sent messages in the Sent items folder, see Save
sent messages in ”General settings,” p. 43.
To see any message you want to send later and have saved as a draft in the Drafts
folder, select Menu > Messaging > Drafts.
You can move your messages to the Saved items folder. To organize your Saved
items subfolders, select Menu > Messaging > Saved items > Saved messages or
a folder you added. To add a new folder for your messages, select Options > Add
folder. To delete or rename a folder, scroll to the folder you want, and select
Options > Delete folder or Rename folder.
Your phone has templates. To create a new template, save or copy a message as a
template. To access the template list, select Menu > Messaging > Saved items >
Templates.
Flash messages
Flash messages are text messages that are instantly displayed upon reception.
Flash messages are not automatically saved.
Write a flash message
Select Menu > Messaging > Create message > Flash message. Enter the
recipient’s phone number in the To: field. Write your message in the Message:
field. The maximum length of a flash message is 70 characters. To send the
message, select Send.
34
M e s s a g i n g
Receive a flash message
A received flash message is indicated with Message:, followed by a few words
from the beginning of the message. To read the message, select Read. To extract
phone numbers, e-mail addresses, and Web site addresses from the current
message, select Options > Use detail.
■ Nokia Xpress audio messaging
You can use the multimedia message service to create and send voice messages
conveniently. Multimedia messaging service must be activated before you can
use audio messages.
Create an audio message
1. Select Menu > Messaging > Create message > Audio message, and
to
start recording.
2. To stop recording, select
and a message screen is displayed.
3. To view the available options, select Options.
4. Enter the recipient’s phone number in the To: field.
To retrieve a phone number from Contacts, select Add > Contact.
To send the message to multiple recipients, add the contacts you want one at
a time.
To send the message to persons in a group, select Contact group and the
group you want.
To retrieve the contacts to which you recently sent messages, select Add >
Recently used.
5. To send the message, select Send.
Receive an audio message
When your phone receives audio messages, either 1 audio message received, or
N messages received is displayed, where N is the number of new messages. To
open the message, select Play; or if more than one message is received, select
Show > Play. To listen to the message later, select Exit. Select Options to see the
available options.
35
M e s s a g i n g
■ Instant messaging
You can take text messaging to the next level by experiencing instant messaging
(IM) (network service) in a wireless environment. You can engage in instant
messaging with friends and family, regardless of the mobile system or platform
(like the Internet) they are using, as long as you all use the same instant
messaging service.
Before you can start using instant messaging, you must first subscribe to your
wireless service provider’s text messaging service and register with the instant
messaging service you want to use. You must also obtain a user name and
password before you can use instant messaging. See ”Register with an instant
messaging service,” p. 36 for more information.
Note: Depending on both your IM service provider and your wireless
service provider, you may not have access to all of the features described
in this guide.
To set the required settings for the instant messaging service, see Connect.
settings in ”Access,” p. 36. The icons and texts on the display may vary,
depending on the IM service.
While you are connected to the IM service, you can use the other functions of the
phone, and the IM conversation remains active in the background. Depending on
the network, the active IM conversation may consume the phone battery faster,
and you may need to connect the phone to a charger.
Register with an instant messaging service
You can do this by registering over the Internet with the IM service provider you
have selected to use. During the registration process, you will have the
opportunity to create the user name and password of your choice. For more
information about signing up for IM services, contact your wireless service
provider.
Access
To access the Instant messages menu while still offline, select Menu >
Messaging > Instant messages. Depending on the IM service provider you are
using, these may not be the exact menu items displayed.
If more than one set of connection settings for the IM service is available, select
the one you want. If there is only one set defined, it is selected automatically.
The following options are shown:
36
M e s s a g i n g
Login — to connect to the IM service. To set the phone to automatically connect
to the IM service when you switch on the phone in the login session, scroll to
Automatic login: and select Change >On, or select Menu > Messaging >
Instant messages, connect to the IM service, and select Settings > Automatic
login > On phone start-up.
Saved convers. — to view, erase, or rename the conversations that you saved
during an IM session
Connect. settings — to edit the settings needed for messaging and presence
connection
Connect
To connect to the IM service, access the Instant messages menu, select the IM
service, if needed, and select Login. When the phone has successfully connected,
Logged in is displayed.
To disconnect from the IM service, select Options > Logout.
Sessions
When connected to the IM service, your status as seen by others is shown in a
status line: Status: Online, My status: Busy or Status: App. off. — to change
your own status, select Change.
Below the status line there are three folders containing your contacts and
showing their status. To expand the folder, highlight it and select Expand (or
scroll right); to collapse the folder, select Collapse (or scroll left).
Conversations — shows the list of new and read instant messages or invitations
to instant messaging during the active IM session.
indicates a new group message.
indicates a read group message.
indicates a new instant message.
indicates a read instant message.
indicates an invitation.
The icons and texts on the display may vary, depending on the IM service you
have selected.
Online — shows the number of contacts that are online.
Offline — shows the number of contacts that are offline.
37
M e s s a g i n g
To start a conversation, expand the Online or Offline folder and scroll to the
contact with whom you want to chat and select Chat. To answer an invitation or
to reply to a message, expand the Conversations folder and scroll to the contact
with whom you want to chat and select Open. To add contacts, see ”Add IM
contacts,” p. 39.
Groups > Public groups (dimmed if groups are not supported by the network) —
the list of bookmarks to public groups provided by the service provider is
displayed. To start an IM session with a group, scroll to a group, and select Join.
Enter the screen name that you want to use as your nickname in the
conversation. When you have successfully joined the group conversation, you can
start a group conversation. You can create a private group. See ”Groups,” p. 39.
Search > Users or Groups — to search for other IM users or public groups on the
network by phone number, screen name, e-mail address, or name. If you select
Groups, you can search for a group by a member in the group, or by group name,
topic, or ID.
Options > Chat or Join group — to start the conversation when you have found
the user or the group that you want.
Accept or reject an invitation
In the standby mode, when you are connected to the IM service and you receive a
new invitation, New invitation received is displayed. To read it, select Read. If
more than one invitation is received, scroll to the invitation you want, and select
Open. To join the private group conversation, select Accept, and enter the screen
name you want to use as your nickname. To reject or delete the invitation, select
Options > Reject or Delete.
Read an instant message
In the standby mode, when you are connected to the IM service, and you receive
a new message that is not a message associated with an active conversation,
New instant message is displayed. To read it, select Read.
If you receive more than one message, N new instant messages appears in the
display, where N is the number of new messages. Select Read, scroll to a
message, and select Open.
New messages received during an active conversation are held in Instant
messages > Conversations. If you receive a message from someone who is not in
IM contacts, the sender ID is displayed. To save a new contact, select Options >
Save contact.
38
M e s s a g i n g
Participate in a conversation
To join or start an IM session, write your message; and select Send, or press the
call key. Select Options to view the available options.
If you receive a new message during a conversation from a person who is not
taking part in the current conversation,
an alert tone.
is displayed, and the phone sounds
Write your message; and select Send, or press the call key. Your message is
displayed, and the reply message is displayed below your message.
Add IM contacts
1. Connect to the IM service and from the IM main menu, select Options > Add
contact.
2. Select By mobile number, Enter ID manually, Search from serv., or Copy
from server (depending on the service provider). When the contact is
successfully added, the phone confirms it.
3. Scroll to a contact. To start a conversation, select Chat.
Block or unblock messages
1. When you are in a conversation with a contact and want to block messages
from this contact, select Options > Block contact > OK.
2. To block messages from a specific contact in your contacts list, scroll to the
contact you want in Conversations, Online or Offline and select Options >
Block contact > OK.
3. To unblock a contact, from the IM main menu, select Options > Blocked list.
Scroll to the contact from whom you want to unblock the messages, and
select Unblock > OK.
Groups
You can create your own private groups for an IM conversation, or use the public
groups provided by the service provider. The private groups exist only during an
IM conversation, and the groups are saved on the server of the service provider. If
the server you are logged into does not support group services, all group-related
menus are dimmed.
39
M e s s a g i n g
Public
You can bookmark public groups that your service provider may maintain.
Connect to the IM service, and select Groups > Public groups. Scroll to a group
with which you want to chat, and select Join. If you are not in the group, enter
your screen name as your nickname for the group. To delete a group from your
group list, select Options > Delete group.
To search for a group, select Groups > Public groups > Search groups. You can
search for a group by a member in the group, by group name, topic, or ID.
Private
Connect to the IM service and from the IM main menu, select Options > Create
group. Enter the name for the group and the screen name that you want to use as
your nickname. Mark the private group members in the contacts list, and write an
invitation.
■ E-mail application
Important: Exercise caution when opening messages. E-mail messages
may contain malicious software or otherwise be harmful to your device
or PC.
The e-mail application uses EGPRS, GPRS, or CSD (network service) to allow you
to access your e-mail account from your phone when you are not in the office or
at home. This e-mail application is different from the SMS e-mail function. To
use the e-mail function on your phone, you need a compatible e-mail system.
You can write, send, and read e-mail with your phone. You can also save and
delete the e-mail on a compatible PC. Your phone supports POP3 and IMAP4
e-mail servers. Before you can send and retrieve any e-mails, you may need to do
the following:
•
Obtain a new e-mail account or use the current one. For availability of your
e-mail account, contact your e-mail service provider.
•
Contact your e-mail service provider for the settings required for e-mail. You
may receive the e-mail configuration settings as a configuration message.
See ”Configuration settings service,” p. 10. You can also enter the settings
manually. See ”Configuration,” p. 68.
To activate the e-mail settings, select Menu > Messaging > Message
settings > E-mail messages. See ”E-mail,” p. 45.
This application does not support keypad tones.
40
M e s s a g i n g
Write and send
1. Select Menu > Messaging > E-mail > Create e-mail.
2. Enter the recipient’s e-mail address, and select OK.
3. Write a subject for the e-mail, and select OK.
4. Enter the e-mail message. See ”Text entry,” p. 28.
To attach a file to the e-mail, select Options > Attach and the file you want
from the Gallery.
5. To send the e-mail message immediately, select Send > Send now.
To save the e-mail in the Outbox folder to be sent later, select Send > Send
later.
To edit or continue writing your e-mail later, select Options > Save draft. The
e-mail is saved in Other folders > Drafts.
To send the e-mail later, select Menu > Messaging > E-mail > Options >
Send now or Retrieve and send.
Download
1. To download e-mail messages that have been sent to your e-mail account,
select Menu > Messaging > E-mail > Retrieve.
2. To download new e-mail messages and send e-mails that have been saved in
the Outbox folder, select Options > Retrieve and send.
3. To first download the headings of the new e-mail messages that have been
sent to your e-mail account, select Options > Check new e-mail.
4. To download the selected e-mails, mark the ones you want, and select
Options > Retrieve.
5. Select the new message in Inbox. To view it later, select Back.
indicates
an unread message.
Read and reply
1. Select Menu > Messaging > E-mail > Inbox > Options to view the available
options.
2. To reply to an e-mail, select Reply > Original text or Empty screen. To reply
to many e-mails, select Options > Reply to all.
41
M e s s a g i n g
3. Confirm or edit the e-mail address and subject; then write your reply. To send
the message, select Send > Send now.
Inbox and other folders
Your phone saves e-mails that you have downloaded from your e-mail account in
the Inbox folder. Other folders contains the following folders: Drafts for saving
unfinished e-mails, Archive for organizing and saving your e-mails, Outbox for
saving e-mails that have not been sent, and Sent items for saving e-mails that
have been sent.
To manage the folders and their e-mail content, select Options > Manage folder.
Delete messages
1. Select Menu > Messaging > E-mail > Options > Manage folder and the
folder you want.
2. Select the messages that you want to delete and Options > Delete.
Deleting an e-mail from your phone does not delete it from the e-mail server. To
set the phone to delete the e-mail from the e-mail server, select Menu >
Messaging > E-mail > Options > Extra settings > Leave copy: > Delete retr.
msgs.
■ Voice messages
If you subscribe to voice mail (network service), your service provider will furnish
you with a voice mailbox number. You need to save this number to your phone to
use voice mail. When you receive a voice message, your phone lets you know by
beeping, displaying a message, or both. If you receive more than one message,
your phone shows the number of messages received.
To call your voice mailbox, select Menu > Messaging > Voice messages > Listen
to voice messages. To enter, search for, or edit your voice mailbox number, select
Voice mailbox number.
If supported by the network,
indicates new voice messages. Select Listen to
call your voice mailbox number.
42
M e s s a g i n g
■ Info messages
With the Info messages network service, you can receive short text messages
from your service provider. To check availability, topics, and the relevant topic
numbers, contact your service provider.
■ Service commands
Use the Service commands editor to enter and send service requests (also known
as USSD commands) to your service provider. Contact your service provider for
information about specific service commands.
Select Menu > Messaging > Service commands.
■ Delete messages
To delete messages one by one, select Menu > Messaging > Delete messages >
By message and the folder from which you want to delete messages. Scroll to the
message you want to delete, and select Delete.
If you want to delete more than one message at the same time, scroll to one of
the messages you want to delete and select Options > Mark. Scroll to each
additional message you want to delete and select Mark or if you want to delete
all the messages, select Options > Mark all. When you have finished marking the
messages you want to delete, select Options > Delete marked.
To delete all messages from a folder, select Menu > Messaging > Delete
messages > By folder and the folder from which you want to delete the
messages. Depending on the folder, the phone asks if you want to delete the
messages. To delete, select Yes. Otherwise, if the folder contains unread
messages or messages which are waiting to be sent, the phone asks whether you
want to keep them. To keep these messages, select Yes.
To delete all messages from all folders, select Menu > Messaging > Delete
messages > All messages > Yes.
■ Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and one of
the following options:
43
M e s s a g i n g
Save sent messages > Yes — to set the phone to save the sent messages in the
Sent items folder
Overwriting in Sent items — to select if overwriting takes place when messages
are sent and the message memory is full
Font size — to select the font size used in messages
Graphical smileys > Yes — to set the phone to replace character-based smileys
with graphical ones
Text messages
The text message settings affect the sending, receiving, and viewing of text and
SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and one of the
following options:
Delivery reports — to select whether the network sends delivery reports about
your messages (network service)
Message centres > Add centre — to set the phone number and name of the
message center that is required for sending text messages. You receive this
the SIM message center information.
Message centre in use — to select the message center in use
E-mail message centres > Add centre — to set the phone numbers and name of
the e-mail center for sending SMS e-mails. If you select SIM e-mail cntr., you
can view the SIM e-mail center information.
E-mail centre in use — to select the SMS e-mail message center in use
Message validity — to select the length of time for which the network attempts
to deliver your message
Messages sent via > Text > Paging, or Fax— to select the format of the messages
to be sent (network service).
Use packet data > Yes — to set GPRS as the preferred SMS bearer
Character support > Full — to select all characters in the messages to be sent as
viewed. If you select Reduced, characters with accents and other marks may be
converted to other characters. When writing a message, you can check how the
message will look to the recipient by previewing the message. See ”Write and
send,” p. 30.
44
M e s s a g i n g
Reply via same centre > Yes — to allow the recipient of your message to send you
a reply using your message center (network service)
Multimedia
The multimedia message settings affect the sending, receiving, and viewing of
multimedia messages.
You may receive the configuration settings for multimedia messaging as a
configuration message. See ”Configuration settings service,” p. 10. You can also
enter the settings manually. See ”Configuration,” p. 68.
Select Menu > Messaging > Message settings > Multimedia msgs. and one of
the following options:
Delivery reports > Yes — to ask the network to send delivery reports about your
messages (network service)
Image size (multimedia) — to define the default image size used in multimedia
messages
Default slide timing — to define the default time between slides in multimedia
messages
Allow multimedia reception > Yes or No — to receive or block the multimedia
message. If you select In home network, you cannot receive multimedia
messages when outside your home network. The default setting of the
multimedia message service is generally In home network.
Incoming multimedia messages — to allow the reception of multimedia
messages automatically, manually after being prompted, or to reject the
reception. This setting is not shown if Allow multimedia reception is set to No.
Allow adverts — to receive or reject advertisements. This setting is not shown if
Allow multimedia reception is set to No, or Incoming multimedia messages is
set to Reject.
Configuration settings > Configuration — only the configurations that support
multimedia messaging are shown. Select a service provider, Default, or Personal
config. for multimedia messaging. Select Account and a multimedia messaging
service account contained in the active configuration settings.
E-mail
The e-mail settings affect the sending, receiving, and viewing of e-mail.
45
M e s s a g i n g
You may receive the configuration settings for the e-mail application as a
configuration message. See ”Configuration settings service,” p. 10. You can also
enter the settings manually. See ”Configuration,” p. 68.
To activate the settings for the e-mail application, select Menu > Messaging >
Message settings > E-mail messages and one of the following options:
Configuration — Select the set that you want to activate.
Account — Select an account provided by the service provider.
My name — Enter your name or nickname.
E-mail address — Enter your e-mail address.
Include signature — You can define a signature that is automatically added to
the end of your e-mail when you write your message.
Reply-to address — Enter the e-mail address to which you want the replies to be
sent.
SMTP user name — Enter the name that you want to use for outgoing mail.
SMTP password — Enter the password that you want to use for outgoing mail.
Display terminal window — Select Yes to perform manual user authentication
for intranet connections.
Incoming server type — Select POP3 or IMAP4, depending on the type of
e-mail system that you are using. If both types are supported, select IMAP4.
Incoming mail settings — Select available options for POP3 or IMAP4.
46
C o n t a c t s
7. Contacts
In Contacts, you can store and manage contact information, such as names,
phone numbers, and addresses. You can save names and numbers in the internal
memory of the phone, the SIM card memory, or in a combination of the two.
Names and numbers saved in the SIM card memory, are indicated by
.
■ Search
Select Menu > Contacts > Names and scroll through the list of contacts or enter
the first letter of the name you are trying to find.
■ Save names and phone numbers
Names and numbers are saved in the used memory. Select Menu > Contacts >
Names > Options > Add new contact and enter the last name, first name, and
the phone number.
■ Save numbers, items, or an image
In the phone memory for contacts, you can save different types of phone
numbers and short text items per name. You can also assign a ringing tone or
video clip to a contact. When you receive an incoming call from a contact to
whom you have assigned a video clip, the video is played on the mini display on
the front of your phone.
The first number you save is automatically set as the default number, and it is
indicated with a frame around the number type indicator (for example,
).
When you select a name, the default number is used unless you select another
number.
1. Make sure that the memory in use is either Phone or Phone and SIM.
2. Scroll to the name to which you want to add a new number or text item, and
select Details > Options > Add detail.
3. To add a number, select Number and one of the number types.
4. To add another detail, select a text type, an image from the Gallery, or a new
image.
47
C o n t a c t s
5. To search for an ID from the server of your service provider (if you have
connected to the presence service), select User ID > Search. See ”My
presence,” p. 49. If only one ID is found, it is automatically saved. Otherwise,
to save the ID, select Options > Save. To enter the ID, select Enter ID
manually, enter the ID and select OK.
6. To change the number type, scroll to the number you want, and select
Options >Change type. To set the selected number as the default number,
select Set as default.
7. Enter the number or text item; to save it, select Save.
8. To return to standby mode, select Back > Exit.
■ Copy a contact
Search for the contact you want to copy, and select Options > Copy contact. You
can copy names and phone numbers from the phone contact memory to the SIM
card memory, or vice versa. The SIM card memory can save names with one
phone number attached to them.
■ Edit contact details
1. Search for the contact you want to edit, select Details, and scroll to the name,
number, text item, or image you want.
2. To edit a name, number, or text item, or to change image, select Options >
Edit name, Edit number, Edit detail, or Change image.
You cannot edit an ID when it is on the IM contacts or the Subscribed names
list.
■ Delete contacts or details
To delete all the contacts and the details attached to them from the phone or SIM
card memory, select Menu > Contacts > Delete all contacts > From phone
mem. or From SIM card. Confirm with the security code.
To delete a contact, search for the contact you want, and select Options > Delete
contact.
To delete a number, text item, or an image attached to the contact, search for the
contact, and select Details. Scroll to the desired detail, and select Options >
48
C o n t a c t s
Delete > Delete number, Delete detail, or Delete image. Deleting an image from
contacts does not delete it from the Gallery.
■ Business cards
You can send and receive a person’s contact information from a compatible
device that supports the vCard standard as a business card.
send, and select Details > Options > Send bus. card > Via multimedia, Via text
message, or Via infrared.
When you have received a business card, select Show > Save to save the business
card in the phone memory. To discard the business card, select Exit > Yes.
■ My presence
With the presence service (network service), you can share your presence status
with other users with compatible devices and access to the service. Presence
status includes your availability, status message, and personal logo. Other users
who have access to the service and who request your information are able to see
your status. The requested information is shown in Subscribed names in the
viewers’ Contacts menu. You can personalize the information that you want to
share with others and control who can see your status.
Before you can use presence, you must subscribe to the service. To check the
availability and costs, and to subscribe to the service, contact your service
provider, from whom you also receive your unique ID, password, and the settings
for the service. See ”Configuration,” p. 68.
While you are connected to the presence service, you can use the other functions
of the phone, and the presence service is active in the background. If you
disconnect from the service, your presence status is shown for a certain amount
of time to viewers depending on the service provider.
Select Menu > Contacts > My presence and one of the following options:
Connect to 'My presence' service or Disconnect from service to connect to or
disconnect from the service.
View my presence to view the status in Private pres. and Public presence
Edit my presence to change your presence status. Select My availability, My
presence message, My presence logo, or Show to.
My viewers > Current viewers, Private list, or Blocked list
49
C o n t a c t s
Settings > Show current pres. in standby, Connection type, or IM and my
presence settings
■ Subscribed names
You can create a list of contacts for whom you want presence status information
available. You can view the information, if it is allowed by the contacts and the
network. To view these subscribed names, scroll through the contacts, or use the
Subscribed names menu.
Ensure that the memory in use is Phone or Phone and SIM.
To connect to the Presence service, select Menu > Contacts > My presence >
Connect to 'My presence' service.
Add contacts
1. Select Menu > Contacts > Subscribed names.
2. If you have no contacts in your list, select Add. Otherwise, select Options >
Subscribe new. The list of your contacts is shown.
3. Select a contact from the list and if the contact has a user ID saved, the
contact is added to the subscribed names list.
4. To subscribe to a contact from the Contacts list, search for the contact you
want, and select Details > Options > Request presence > As subscription.
If you only want to view the presence information but not subscribe to a
contact, select Request presence > One time only.
View
To view the presence information, see ”Search,” p. 47.
1. Select Menu > Contacts > Subscribed names.
The status information of the first contact in the subscribed names list is
displayed. The information that the person wants to give to the others may
include text and some of the following icons:
,
, or
available.
indicates that the person’s presence information is not available.
indicate that the person is either available, discreet, or not
50
C o n t a c t s
2. Select Options > View details to view the details of the selected contact; or
select Options > Subscribe new, Send message, Send bus. card, or
Unsubscribe.
Unsubscribe
To unsubscribe a contact from the Contacts list, select the contact and
Options > Unsubscribe > OK.
To unsubscribe from the Subscribed names menu, see ”View,” p. 50.
■ Settings
Select Menu > Contacts > Settings and one of the following options:
Memory in use — to select the SIM card or phone memory for your contacts.
Select Phone and SIM to recall names and number from both memories. In that
case, when you save names and numbers, they are saved in the phone memory.
Contacts view — to select how the names and numbers in Contacts are displayed
Name display — to select whether the contact’s first or last name is displayed
first
Font size — to set the font size for the list of contacts
Memory status — to view the free and used memory capacity
■ Groups
Select Menu > Contacts > Groups to arrange the names and phone numbers
saved in the memory into caller groups with a different ringing tone and a group
image.
■ Speed dialling
To assign a number to a speed dialing key, select Menu > Contacts > Speed dials,
and scroll to the speed dialing number that you want.
Select Assign, or if a number has already been assigned to the key, select
Options > Change. Select Search and the contact you want to assign. If the
Speed dialling function is off, the phone asks whether you want to activate it.
To make a call using speed dialing see ”Speed dialling,” p. 24.
51
C o n t a c t s
■ Service and my numbers
Select Menu > Contacts and one of the following options:
Service numbers — to call the service numbers of your service provider if the
numbers are included on your SIM card (network service)
My numbers — to view the phone numbers assigned to your SIM card. This is only
shown if the numbers are included on your SIM card.
52
C a l l l o g
8. Call log
The phone registers the phone numbers of identified missed, received, and dialed
calls, and the approximate length of your calls. The phone registers missed and
received calls only if the network supports these functions, and the phone is
turned on and within the network’s service area.
To view the information on your calls, select Menu > Log > Missed calls,
Received calls, or Dialled numbers. To view your recent missed and received calls
and the dialed numbers chronologically, select Call log. To view the contacts to
whom you most recently sent messages, select Message recipients.
To view the approximate information on your recent communications, select
Menu > Log > Call duration, Packet data counter, or Packet data conn. timer.
To view how many text and multimedia messages you have sent and received,
select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service
provider may vary, depending upon network features, rounding off for
billing, taxes, and so forth.
Some timers may be reset during service or software upgrades.
■ Positioning information
The network may send you a location request. You can ensure that the network
will deliver location information of your phone only if you approve it (network
service). Contact your service provider to subscribe and to agree upon the
delivery of location information. Some networks allow you to request the
position of the phone (network service).
To accept or reject the location request, select Accept or Reject. If you miss the
request, the phone automatically accepts or rejects it according to what you have
agreed with your service provider. The phone displays 1 missed position request.
To view the missed location request, select Show.
To view the information on the 10 most recent privacy notifications and requests
or to delete them, select Menu > Log > Positioning > Position log > Open
folder or Delete all.
53
S e t t i n g s
9. Settings
Use this menu to set or change your profiles, themes, personal shortcuts, time
and date settings, WLAN/Wi-Fi settings, call settings, phone settings, main
display settings, mini display settings, tone settings, enhancement settings,
configuration settings, security settings, and to restore factory settings.
■ Profiles
Your phone has various setting groups, called profiles, for which you can
customize the phone tones for different events and environments.
Select Menu > Settings > Profiles and a profile.
•
•
To activate the selected profile, select Activate.
To personalize the profile, select Personalise, and select the setting you want
to change: then, make the changes.
•
To set the profile to be active until a certain time (up to 24 hours), select
Timed and set the time you want the profile setting to end. When the time set
for the profile expires, the previous profile (that was not timed) becomes
active.
■ Themes
You can change the look of your phone display by activating a theme. A theme
can include a wallpaper image, a ringing tone, a screen saver, and a color scheme.
Themes are stored in the Gallery.
Select Menu > Settings > Themes and one of the following options:
Select theme — to set a theme in your phone. A list of folders in the Gallery
opens. Open the Themes folder, and select a theme.
Theme downloads — to open a list of links to download more themes. See
”Download settings,” p. 95.
■ Tones
You can change the settings of the selected active profile.
54
S e t t i n g s
Select Menu > Settings > Tones. and edit the available settings. You can find the
same settings when you personalize a profile in the Profiles menu. See ”Profiles,”
p. 54.
To set the phone to ring only upon calls from phone numbers that belong to a
selected caller group, select Alert for:. Scroll to the caller group you want or All
calls, and select Mark.
■ Display
With display settings, you can personalize your display view of the phone.
Main display
You can select display settings for the start screen (main display).
Standby mode settings
Select Menu > Settings > Main display > Standby mode settings and one of the
following options:
Active standby > My active standby — to display the active standby. Select
Options and one of the following options:
•
•
•
Personalise — to change the content.
Organise — to reorganize the content on the display.
Enabling standby — to change the key for accessing the navigation mode.
The same setting is also in the My shortcuts menu. See ”Enabling active
standby,” p. 58.
Wallpaper — to display a background picture (wallpaper) on the start screen.
Select Wallpapers > Image or Slide set and an image or a slide from the Gallery
or Open Camera to take a photo. To download more graphics, select Graphic
downloads.
Fold animation — to select whether an animation is shown when opening and
closing the fold. The fold animation is only visible if it is supported by and
selected from the active theme set in your phone. See ”Themes,” p. 54.
Standby mode font colour — to select the color for the texts on the display in the
standby mode
Navigation key icons — to set the scroll key icons that are shown in the standby
mode
Operator logo — to set your phone to display or hide the operator logo.
55
S e t t i n g s
Cell info display > On — to receive information from the network operator
depending on the network cell used (network service).
Screen saver
To select a screen saver, select Gallery > Menu > Settings > Main display >
Screen saver > Screen savers > Image, Slide set, Open Camera, Video clip,
Analogue clock or Digital clock. To download more screen savers, select Graphic
downloads. To enter the time after which the screen saver is activated, select
Time-out. To activate the screen saver, select On.
Power saver
To save some battery power, select Menu > Settings > Main display > Power
saver > On. A digital clock is displayed when no function of the phone is used
after a certain period of time.
Font size
This feature allows you to select the font size for Messaging, Contacts and Web.
Select Menu > Settings > Main display > Font size and one of the following:
Messaging — to select the font size you want to use for messages. Select either
Extra small font, Normal font or Large font.
Contacts — to select the font size you want to display your contacts’ names.
Select either Normal font or Large font.
Web — to select the font size you want to display for mobile Internet pages.
Select either Extra small font, Small font or Large font.
Mini display
You can select display settings for the mini display on the front of your phone.
Wallpaper
Select Menu > Settings > Mini display > Wallpaper > Wallpapers > Image or
Slide set and an image or a slide from the Gallery or Open Camera to take a
photo. To download more graphics, select Graphic downloads.
Screen saver
Select Menu > Settings > Mini display > Screen saver >Screen savers > Image,
Slide set, Video clip, Analogue clock, Digital clock or Open Camera. To
download more screen savers, select Graphic downloads. To enter the time after
which the screen saver is activated, select Time-out. To activate the screen saver,
select On.
56
S e t t i n g s
Power saver
To save some battery power, select Menu > Settings > Mini display > Power
saver > On. A digital clock is displayed when no function of the phone is used
after a certain period of time.
Fold animation
To select whether an animation is shown when opening and closing the fold,
select Menu > Settings > Mini display > Fold animation > On.
The fold animation is only visible if it is supported by and selected from the active
theme set in your phone. See ”Themes,” p. 54.
■ Time and date
Select Menu > Settings > Time and date and one of the following options:
Clock — to set the phone to show or hide the clock in the standby mode, adjust
the clock, and select the time zone and the time format.
Date — to set the phone to show or hide the date in the standby mode, set the
date, and select the date format and date separator.
Auto-update of date & time (network service) — to set the phone to
automatically update the time and date to the appropriate time zone.
■ My shortcuts
You can set your most frequently used functions to be quickly accessed through
the My shortcuts feature.
Left selection key
To select a function from the list for the left selection key, select Menu >
Settings > My shortcuts > Left selection key. See also ”Standby mode,” p. 19.
To activate a function in the standby mode if the left selection key is Go to, select
Go to and the function you want on your personal shortcut list.
Select Options and from the following options:
Select options — to add a function to the shortcut list, or to remove one. Scroll to
the function, and select Mark or Unmark.
Organise— to rearrange the functions on your personal shortcut list. Scroll to the
function you want to move, and select Move. Scroll to where you want to move
the function, and select OK. Repeat this process, if you want to move another
57
S e t t i n g s
function. When you have completed rearranging the functions you want, select
Done > Yes.
Right selection key
To set a specific function (from a predefined list) to the right selection key, select
Menu >Settings > My shortcuts > Right selection key. This function can be
used only if it is supported by your service provider.
Navigation key
This key allows you to scroll up, down, left, and right. To assign other phone
functions (from a predefined list) to the navigation key, select Menu >
Settings > My shortcuts > Navigation key. Scroll to the key you want, select
select (empty). To reassign a function for the key, select Assign.
Enabling active standby
This function allows you to select how the active standby mode is activated.
Select Menu > Settings > My shortcuts > Enabling standby > Navigation key
up, Navigat. key down, or Nav. key up/down.
Voice commands
You can call contacts and carry out phone functions by saying voice commands.
Voice commands are language-dependent. To set the language, see Voice
playback language in ”Phone,” p. 66.
To select the phone functions to activate with a voice command, select Menu >
Settings > My shortcuts > Voice commands and a folder. Scroll to a function
you want.
indicates that the voice tag is activated. To deactivate the voice
command, select Options > Remove. To activate the voice tag, select Add. To
play the activated voice command, select Playback. To use voice commands, see
”Enhanced voice dialling,” p. 24.
To manage the voice commands, scroll to a phone function, and select from the
following options:
Edit or Remove — to change or deactivate the voice command of the selected
function
Remove all — to deactivate voice commands to all functions in the voice
commands list.
58
S e t t i n g s
■ Connectivity
You can connect the phone to compatible devices, using an infrared, or a USB
data cable (CA-53) connection. You can also define the settings for EGPRS or
GPRS dial-up connections.
WLAN/Wi-Fi
Note: Some places, like France, have restrictions on the use of wireless
LAN. Check with your local authorities for more information.
This device can detect and connect to a wireless local area network (WLAN)
through call over local access (UMA). This technology allows a seamless handoff
of mobile voice and data from a wide area cellular network to WLAN or Wireless
Fidelity (Wi-Fi), so it is possible to connect at a high speed to the Internet from
virtually anywhere.
Before you can start using UMA, you must first obtain a UMA account with your
service provider. Since this device was specially designed to detect and connect
to WLAN/Wi-Fi, the proper settings should already be configured in your phone.
For more information, contact your service provider.
If you move the device to another location within the wireless LAN and out of
range of a WLAN/Wi-Fi access point, the roaming functionality can
automatically connect your device to another access point that belongs to the
same network. As long as you remain within range of access points that belong to
the same network, your device can stay connected to the network.
A WLAN/Wi-Fi connection is established when you create a data connection
using a WLAN/Wi-Fi access point. The active WLAN/Wi-Fi connection is ended
when you end the data connection.
Features using WLAN/Wi-Fi, or allowing such features to run in the background
while using other features, increase the demand on battery power and reduce the
battery life.
Wi-Fi radio
To turn the Wi-Fi radio on, select Menu > Settings > Connectivity > Wi-Fi >
Wi-Fi radio > On.
To turn the Wi-Fi radio off, select Menu > Settings > Connectivity > Wi-Fi >
Wi-Fi radio > Off > Yes.
59
S e t t i n g s
Available networks
The list of available networks shows all the available networks to which you can
connect.
indicates that a network is connected and
indicates that a
network is saved.
A network may be hidden and can only be found by searching for its service set
identifier (SSID), which is a code attached to all packets on a wireless network to
identify each packet as part of that network. All wireless devices attempting to
communicate with each other must share the same SSID.
1. Select Menu > Settings > Connectivity > Wi-Fi > Available networks.
2. If you have not connected to WLAN/Wi-Fi first, a message asks if you want to
turn on WLAN/Wi-Fi first. Select Yes.
The phone searches for available networks and when the networks are found,
they are listed in signal strength order.
3. Scroll to the network you want and select Connect.
A message confirming network connection is displayed. If you have not saved
the network, a message asks if you want to save it.
4. Select Yes to save the network or No to not save the network.
5. To save an available network to which you have not connected, select
Options > Save.
6. To update the list of available networks, select Options > Refresh. Or if the
list of available networks is empty, select Refresh.
7. To locate a hidden network, select Options > Hidden networks, enter the
SSID of the network you want to find and select OK.
8. To disconnect from the network, select Disconn.
Saved networks
The list of saved networks consists of all the networks you have saved. The name
of the network and the connection setting is displayed. The networks are listed in
order of priority and the network with the highest priority is automatically the
first one where a connection attempt is made.
1. Select Menu > Settings > Connectivity > Wi-Fi > Saved networks.
2. Scroll to the network you want and select Connect.
3. If you have not connected to WLAN/Wi-Fi first, a message asks if you want to
turn on WLAN/Wi-Fi first. Select Yes.
60
S e t t i n g s
A message confirming network connection is displayed.
4. To rename a saved network, scroll to the network you want and select
Options > Rename. Select Clear as many times as necessary to delete the
network name, enter the new network name, and select OK.
5. To forward the settings of a saved network, scroll to the network you want,
select Options > Forward settings, enter the security code (preset code is
12345) and select OK. Enter a phone number and select Send.
6. To change the priority of a saved network, select Options > Organise priority,
scroll to the network you want and select Move > Move up, Move down,
Move to top or Move to bottom > Done > Yes.
Each saved network has its individual connection settings, which offer different
ways to connect to the network. Scroll to the network you want and select
Options > Conn. setting and one of the following options:
Ask first — to be asked to be connected to a network when it becomes available
Automatic — to be connected to the network automatically
Manual — to be connected to the network only when done manually
Other options for saved networks are edit a saved network’s settings, delete a
saved network or add a new network.
Quick connect
Quick connection allows you to connect to an open network with the best signal
strength.
1. From the standby mode, select Go to > Quick connect or from the Wi-Fi
menu, select Quick connect.
2. If you have not connected to WLAN/Wi-Fi first, a message asks if you want to
turn on WLAN/Wi-Fi first. Select Yes.
3. If you are already connected to another network, a message asks if you want
to disconnect from that network. Select Yes.
The phone searches for networks and when the network with the best signal
strength is found, a message confirming network connection is displayed. If you
have not saved the network, a message asks if you want to save it. Select Yes or
No if you want to save the network or not. If no available networks can be found,
the message, No quick connect networks available, is displayed.
61
S e t t i n g s
Wi-Fi call settings
Configuration — Select an UMA configuration from the list.
Account — Select an UMA account from the list.
Connection failure
You may not be able to connect to the network at times. Try connecting to the
network later, as this may be only a temporary error. If the connection still fails,
contact your service provider.
Login failure
If you attempt to login to a network without a UMA subscription, Contact your
service provider is displayed.
Infrared
You can set up the phone to send and receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant. You can send or receive data to or from a
compatible phone or data device (for example, a computer) through the IR port of
your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate the IR port of your phone, select Menu > Settings > Connectivity >
Infrared.
To deactivate the IR connection, select Menu > Settings > Connectivity >
Infrared. When the phone displays Deactivate infrared?, select Yes.
If data transfer is not started within two minutes after the activation of the IR
port, the connection is canceled and must be started again.
IR connection indicator
When
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
is shown continuously, the IR connection is activated, and your
connection has been lost.
62
S e t t i n g s
Packet data
General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an Internet protocol (IP) based network.
GPRS is a data bearer that enables wireless access to data networks such as the
Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For
more information on availability of EGPRS or GPRS and data transfer speed,
contact your network operator or service provider.
The applications that may use EGPRS or GPRS are MMS, video streaming,
browsing sessions, e-mail, remote SyncML, Java application downloading, and
the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of
GPRS, if this is available in the network. You cannot select between EGPRS and
GPRS, but for some applications you may be able to select GPRS or GSM data
(circuit switched data, CSD).
To define how to use the service, select Menu > Settings > Connectivity >
Packet data > Packet data connection and one of the following options:
When needed — to set the packet data registration and connection to
established when an application using packet data needs it and closed when you
end the application.
Always online — to set the phone to automatically register to an packet data
network when you switch the phone on.
or
indicates that the GPRS or
EGPRS service is available.
If you receive a call or a text message, or make a call during a GPRS or EGPRS
connection,
(on hold).
or
indicates that the GPRS or EGPRS connection is suspended
Packet data settings
You can connect the phone using an infrared, or a USB data cable connection to a
compatible PC and use the phone as a modem to enable EGPRS or GPRS
connectivity from the PC.
To define the settings for EGPRS or GPRS connections from your PC, select
Menu > Settings > Connectivity > Packet data > Packet data settings > Active
access point, and activate the access point you want to use. Select Edit active
access point > Alias for access point, enter a name to change the access point
settings, and select OK. Select Packet data access point, enter the access point
63
S e t t i n g s
name (APN) to establish a connection to an EGPRS or GPRS network, and select
OK.
You can also set the EGPRS or GPRS dial-up service settings (access point name)
on your PC, by using the One Touch Access software. See ”Nokia PC Suite,” p. 100.
If you have set the settings both on your PC and on your phone, the PC settings
are used.
Data transfer and synchronization
Synchronize your data from calendar, notes, and contacts with another
compatible device (for example, a mobile phone), a compatible PC, or a remote
Internet server (network service).
Your phone allows data transfer with a compatible PC or another compatible
device when using the phone without a SIM card. Note that when you use the
phone without a SIM card, some functions appear dimmed in the menus and
cannot be used. To synchronize with a remote Internet server is not possible
without a SIM card.
To copy or synchronize data from your phone, the name of the device and the
settings must be in the list of partners in transfer contacts. If you receive data
from another compatible device, the partner is automatically added to the list,
using the contact data from the other device. Server sync and PC sync settings
are the original items in the list.
To add a new partner to the list, such as a new device, select Menu > Settings >
Connectivity > Data transfer > Options > Add contact > Phone sync or Phone
copy, and enter the settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the partner list,
and select Options > Edit.
To delete a selected partner, select Options > Delete> OK. You cannot delete
Server sync and Phone sync.
Data transfer with a compatible device
For synchronization, use an infrared, or a USB data cable connection. The other
device is in the standby mode.
To start a data transfer, select Menu > Settings > Connectivity > Data transfer
and the transfer partner from the list other than Server sync and PC sync. Based
on the settings, the selected data is copied or synchronized. The other device also
must be activated to receive data.
64
S e t t i n g s
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts from a compatible PC,
use an infrared or a USB data cable connection. You also need the correct version
of Nokia PC Suite software for your phone installed on the PC. See ”PC
connectivity,” p. 100 for information about Nokia PC Suite.
Synchronize the data in the phone contacts, calendar, and notes to correspond
with the data of your compatible PC by starting the synchronization from the PC.
Synchronize from a server
To use a remote Internet server, you have to subscribe to a synchronization
service. For more information and the settings required for this service, contact
your service provider. You may receive the settings as a configuration message.
See ”Configuration settings service,” p. 10 and ”Configuration,” p. 68.
If you have saved data on the remote Internet server, you can synchronize your
phone by starting the synchronization from your phone.
Select Menu > Settings > Connectivity > Data transfer > Server sync.
Depending on the settings, select Initialising sync or Initialising copy.
If the contacts or calendar are full, synchronizing may take up to 30 minutes to
complete, when synchronizing for the first time, or after an interrupted
synchronization.
USB data cable
You can use the USB data cable to transfer data between the memory card
inserted in the phone and a compatible PC or a printer supporting PictBridge. You
can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing, connect the
data cable; when the phone displays USB data cable connected. Select mode.,
select OK and one of the following options:
Default mode — to use the cable for Nokia PC Suite
Printing — to print pictures directly from the phone using a compatible printer.
Data storage — to activate the memory card for data transfer
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Default mode, Printing, or Data storage.
■ Call
Select Menu > Settings > Call and one of following options:
65
S e t t i n g s
Call divert — to divert your incoming calls (network service). Call divert and call
barring cannot be active at the same time. See Call barring service in ”Security,”
p. 68.
Anykey answer > On — to answer an incoming call by briefly pressing any key,
except the left and right selection keys, or the end key.
Answer when fold is opened > On — to set your phone to answer a call when
you open the fold. If the setting is off, you must press the call key after you open
the fold.
Automatic redial > On — to set your phone to make a maximum of 10 attempts
to connect the call after an unsuccessful call attempt.
Speed dialling > On and the names and phone numbers assigned to the
while you have a call in progress (network service). See ”Call waiting,” p. 25.
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call.
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service
provider, select Set by network.
■ Phone
Select Menu > Settings > Phone and one of the following options:
Language settings > Phone language — to set the display language of your
phone. If you select Automatic, the phone selects the language according to the
information on the SIM card.
•
•
To select the USIM card language, select SIM language.
To set a language for the voice playback, select Voice playback language. See
”Make a voice dialing call,” p. 25 and Voice commands in ”My shortcuts,”
p. 58.
Memory status — to view the free memory and the used memory for each
function in the list
Security keyguard — to set the phone to ask for the security code when you
unlock the keyguard. Enter the security code, and select On. When the keyguard
is on, calls still may be possible to the official emergency number programmed
into your device.
66
S e t t i n g s
Flight query — to set the phone to ask if Flight mode should be used each time
the phone is turned on. In Flight mode, all radio connections are turned off.
Flight mode should be used in areas sensitive to radio emissions.
Welcome note — to create the welcome note you would like to be shown briefly
when the phone is turned on
Phone updates — to update the phone software when an update is available and
if these updates are supported by your service provider. See ”Phone software
updates,” p. 69.
Operator selection > Automatic — to set the phone automatically to select one
of the cellular networks available in your area. With Manual, you can select a
network that has a roaming agreement with your service provider.
Confirm SIM service actions. This option is shown only if supported by your SIM
card. See ”SIM services,” p. 99.
Help text activation — to select whether the phone shows help texts
Start-up tone — to select whether the phone plays a start-up tone when the
phone is turned on
Switch off tone — to select whether the phone plays a switch off tone when the
phone is turned off. This menu is only visible if the tone exists in Themes or is part
of the powering down functionality of your service provider.
■ Enhancements
This menu is shown only if the phone is or has been connected to a compatible
mobile enhancement, other than the charger.
Select Menu > Settings > Enhancements. You can select an enhancement menu
if the corresponding enhancement is or has been connected to the phone.
Depending on the enhancement, select from one of the following options:
Default profile — to select the profile that you want to be automatically
activated when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after five seconds. If Incoming call alert is set to Beep once or Off, automatic
answer is off.
Lights — to set the lights permanently On. Select Automatic to set the lights on
for 15 seconds after a key press
Ignition detector > On — to automatically switch off the phone approximately
20 seconds after you switch off the car ignition, when the phone is connected to
the full car kit
67
S e t t i n g s
Text phone > Use text phone > Yes — to use text phone settings instead of
headset settings
■ Configuration
You can configure your phone with settings that are required for certain services
to function correctly. The services are multimedia messaging, instant messaging,
synchronization, e-mail application, streaming, push to talk, and browser. Your
service provider may also send you these settings as a configuration message.
To save the configuration settings received as a configuration message, see
”Configuration settings service,” p. 10.
Select Menu > Settings > Configuration and one of the following options:
Default configuration settings — to view the service providers saved in the
phone. Scroll to a service provider, and select Details to view the applications
that the configuration settings of this service provider supports. To set the
configuration settings of the service provider as default settings, select
Options > Set as default. To delete configuration settings, select Delete.
Activate default in all applications — to activate the default configuration
settings for supported applications
Preferred access point — to view the saved access points. Scroll to an access
point, and select Options > Details to view the name of the service provider, data
bearer, and packet data access point or GSM dial-up number.
Connect to service provider support — to download the configuration settings
from your service provider, if this is supported by your service provider
Personal configuration settings — to add new personal accounts for various
services manually, and to activate or delete them. To add a new personal account
if you have not added any, select Add new; otherwise, select Options > Add new.
Select the service type, and enter each of the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select Options > Delete or Activate.
■ Security
When security features that restrict calls are in use (such as call barring, closed
user group, and fixed dialing) calls still may be possible to the official emergency
number programmed into your device.
Select Menu > Settings > Security and one of the following options:
68
S e t t i n g s
PIN code request — to set the phone to ask for your PIN or UPIN code every time
the phone is switched on. Some SIM cards do not allow the code request to be
turned off.
Call barring service — to restrict incoming calls to and outgoing calls from your
Fixed dialling — to restrict your outgoing calls to selected phone numbers, if this
function is supported by your SIM card
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level > Phone — the phone asks for the security code whenever a new
SIM card is inserted into the phone. Select Memory and the phone asks for the
security code when the SIM card’s memory is selected and you want to change
the memory in use.
Access codes — to set the PIN code or UPIN code in use, or to change the security
code, PIN code, UPIN code, PIN2 code, and call barring password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority or
user certificates downloaded into your phone. See ”Certificates,” p. 97.
Security module settings — to view Security module details, activate Module
PIN request, or change the module PIN and signing PIN. See also ”Access codes,”
p. 9.
■ Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Restore factory sett. and enter the security code. Data that you have
entered or downloaded is not deleted. For example, names and numbers in
Contacts are not affected.
■ Phone software updates
You may initiate phone software updates from the Phone updates menu. Also,
your service provider may initiate the updates by sending them over the air
directly to your device. This function is known as firmware over the air (FOTA).
Warning: If you start a software update, you cannot use the device,
even to make emergency calls, until the update is completed and the
device is restarted. Be sure to back up data before accepting a FOTA
update.
69
S e t t i n g s
Settings
Note: Check with your service provider regarding any settings that may
be required for Internet access.
To select whether to allow phone software updates initiated by your service
provider, select Menu > Settings > Configuration > Device manager settings >
Service provider software updates and one of the following options:
Always allow — to perform all software downloads and updates automatically
Always reject — to reject all software updates
Confirm first — to perform software downloads and updates only after your
confirmation (default setting)
Depending on your settings, you will be notified that a software update is
available for download or has been downloaded and installed automatically.
Request
Select Menu > Settings > Phone > Phone updates to request available phone
software updates from your service provider. Select Current software details to
display the current software version. Select Download phone software to
download and install a phone software update (if an update is available). Follow
the instructions on the display.
Install
Select Install software update to start the installation, if you cancelled the
installation after the download.
The software update may take several minutes.
Note: If there are problems with the download or installation, contact
your service provider.
70
G a l l e r y
11. Gallery
In this menu, you can manage graphics, images, recordings, and tones. These files
are arranged in folders.
Your phone supports an activation key system to protect acquired content.
Always check the delivery terms of any content and activation key before
acquiring them, as they may be subject to a fee.
The files stored in the Gallery use a memory that may have a capacity of
approximately 8 MB in the phone. You can use a compatible memory card to
extend the memory capacity to store images, themes, graphics, ringing tones,
video clips, and sound clips in the Gallery.
To manage the files and folders, do the following:
1. Select Menu > Gallery. A list of folders is shown. If a memory card is inserted
in the phone, the folder Memory card, (unformat.), or the name of the
memory card is shown.
2. Scroll to the folder you want. To view a list of files in the folder, select Open.
For the available options, select Options.
3. Scroll to the file you want to view, and select Open. For the available options,
select Options.
■ Format memory card
To format a new memory card, select Menu > Gallery. Scroll to the memory card
folder, and select Options > Format mem. card.
72
M e d i a
12. Media
■ Camera
You can take photos or record video clips with the built-in camera. The camera
produces pictures in JPEG format and video clips in 3GPP format. The camera lens
is on the front of the phone. The color display and the mini display on the front of
the phone work as a viewfinder.
When taking and using images or video clips, obey all laws and respect local
customs, as well as privacy and legitimate rights of others.
Take a photo
1. Select Menu > Media > Camera > Capture, or press the camera key and
select Capture.
The phone saves the photo in Gallery > Images, unless you set the phone to
use the memory card to save photos.
2. To take another photo, select Back.
3. To zoom in or out, press the four-way navigation key up or down.
4. To take up to five photos in quick succession, select Options > Img. sequence
on > Sequen. To take another photo, select Options > New image.
The higher the resolution, the fewer photos you can take sequentially.
5. To send the photo as a multimedia message, select Send.
6. To set a timer to delay capturing a photo for 10 seconds, select Options >
Self-timer on > Start.
A beep sounds while the self-timer is running, and beeps faster when the
camera is about to capture the photo. After the timeout, the camera takes the
photo and saves the photo in Gallery > Images.
7. To take a photo when the lighting is dim and the camera needs a longer
exposure time for the photo to be of good quality, select Options > Night
mode on.
8. To take a self-portrait, close the fold to use the mini display as a view finder
and press the camera release key.
73
M e d i a
This Nokia device supports an image capture resolution of 1280 x 1024 pixels.
The image resolution in these materials may appear different.
Record a video clip
Select Menu > Media > Camera > Options > Video > Record. To pause
recording, select Pause; to resume recording, select Continue. To stop recording,
select Stop. The phone saves the recording in Gallery > Video clips. To view the
options, select Options.
Camera settings
Select Menu > Media > Camera > Options > Settings and edit the available
settings.
■ Media player
With the media player you can view, play, and download files, such as images,
audio, video and animated images. You can also view compatible streaming
videos from a network server (network service).
Select Menu > Media > Media player > Open gallery, Bookmarks, Go to
address, or Media downloads.
Set for streaming service
You may receive the configuration settings required for the streaming as a
configuration message from the network operator or service provider. See
”Configuration settings service,” p. 10. To enter the settings manually, see
”Configuration,” p. 68.
Select Menu > Media > Media player > Streaming sett. and one of the
following options:
Configuration — Only the configurations that support streaming are displayed.
Select a service provider, Default, or Personal config.
Account — Select a streaming service account contained in the active
configuration settings.
■ Music player
Your phone includes a music player for listening to MP3, MP4, WMA (Windows
Media Audio), AAC, AAC+, or eAAC+ music files that you have transferred to the
74
M e d i a
phone with the Nokia Audio Manager application. Music files are automatically
detected and added to the default track list.
Play music tracks
1. Select Menu > Media > Music player. The details of the first track on the
default track list are shown.
2. To play a track, scroll to the track that you want, and select
.
3. To skip to the beginning of the next track, select
of the previous track, select twice.
4. To rewind the current track, select and hold
. To skip to the beginning
. To fast forward the current
track, select and hold
. Release the key at the position you want.
5. To stop the playing, select
.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because the volume may be
extremely loud.
Settings
In the Music player menu, the following options may be available:
Track list — to view all the tracks available on the track list. To play a track, scroll
to the track you want, and select Play. Select Options > Refresh all tracks or
Change track list to refresh the track list (for example, after adding new tracks to
the list) or change the track list that is shown when you open the Music player
menu, if several track lists are available in the phone.
Play options > Random > On — to play the tracks in the track list in random
order. Select Repeat > Current track or All tracks to play the current track or the
entire track list repeatedly.
Media equaliser — to open the list of media equalizer sets. See ”Equaliser,” p. 78.
Send — to send the selected file using MMS or an Infrared connection
Web page — to connect to a Web address attached to the current file in the
tracklist
Music downloads — to connect to a browser service related to the current track.
This function is only available when the address of the service is included in the
track.
75
M e d i a
Memory status — to view the free and used memory capacity
■ Radio
The FM radio depends on an antenna other than the wireless device antenna. A
compatible headset or enhancement needs to be attached to the device for the
FM radio to function properly.
Note: Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing.
Select Menu > Media > Radio. To use the graphical keys
,
,
, or
on
the phone display, scroll left or right to the key you want and select it.
Save channels
1. To start the channel search, select and hold
or . To change the radio
frequency in 0.05 MHz steps, press or
.
2. To save the channel to a memory location 1 to 9, press and hold the
corresponding number key.
3. To save the channel in the memory location from 10 to 20, press 1 or 2, and
press and hold the number key (0 to 9) you want.
4. Enter the name of the channel, and select OK.
Listen
1. Select Menu > Media > Radio.
2. To scroll to the channel you want, select
or , or press the headset key.
3. To select a radio channel location, briefly press the corresponding number
keys.
4. Select Options and one of the following options:
Switch off — to turn off the radio
Save station — to save a new channel by entering the channel’s name
Visual Radio — to set whether the Visual Radio application is used (network
service). To check the availability and costs, contact your network operator or
service provider. Some radio channels may send text or graphical information
that you can view using the Visual Radio application.
76
M e d i a
Visual Radio sett. — to select the options for Visual Radio. To set whether the
Visual Radio application starts automatically when you turn on the radio,
select Enable visual service > Automatically.
Stations — to select the list of saved channels. To delete or rename a channel,
scroll to the channel you want, and select Options > Delete station or
Rename.
Mono output or Stereo output — to listen to the radio in monophonic sound
or in stereo
Loudspeaker or Headset — to listen to the radio using the loudspeaker or
headset. Keep the headset connected to the phone. The lead of the headset
functions as the radio antenna.
Set frequency — to enter the frequency of the radio channel you want
You can normally make a call or answer an incoming call while listening to the
radio. During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is sending or
receiving data, it may interfere with the radio.
■ Recorder
You can record pieces of speech, sound, or an active call. This is useful when
recording a name and phone number for writing them down later.
The recorder cannot be used when a data call, EGPRS, or GPRS connection is
active.
Record sound
1. Select Menu > Media > Recorder.
2. To start recording, select . To start recording during a call, select Options >
Record. While recording a call, all parties to the call hear a faint beeping
sound. When recording a call, hold the phone in the normal position near to
your ear.
3. To stop recording, select
.
The recording is saved in Gallery > Recordings.
4. To listen to the latest recording, select Options > Play last recorded.
77
M e d i a
5. To send the last recording using infrared or as a multimedia message, select
Options > Send last recorded.
List of recordings
1. Select Menu > Media > Recorder > Options > Recordings list.
The list of folders in the Gallery is shown.
2. Open Recordings to see the list with recordings.
3. Select Options to select options for files in the Gallery. See ”Gallery,” p. 72.
Define a storage folder
To use a folder other than Recordings as the default folder in the Gallery, select
Menu > Media > Recorder > Options > Select memory and a folder from the
list.
■ Equaliser
You can control the sound quality when using the music player by amplifying or
attenuating frequency bands.
1. Select Menu > Media > Equaliser.
2. To activate a set, scroll to one of the equalizer sets, and select Activate.
3. To view, edit, or rename a selected set, select Options > View, Edit, or
Rename.
Not all sets can be edited or renamed.
■ Stereo widening
To enhance the sound that is available in stereo with a wider stereo effect, select
Menu > Media > Stereo widening > On.
78
P u s h t o t a l k
13. Push to talk
Push to talk (PTT) over cellular is a two-way radio service available over a GSM/
GPRS cellular network (network service). PTT provides direct voice
communication. To connect, press the volume up key.
You can use PTT to have a conversation with one person or with a group of people
having compatible devices. When your call is connected, the people you are
calling do not have to answer the phone. The participants should confirm the
reception of any communication where appropriate, as there is no other
confirmation whether the recipients have heard the call.
To check availability and costs, and to subscribe to the service, contact your
service provider. Roaming services may be more limited than for normal calls.
Before you can use the PTT service, you must define the required PTT service
settings. See ”PTT settings,” p. 83.
While you are connected to the PTT service, you can use the other functions of
the phone. The PTT service is not connected to traditional voice communication;
therefore many of the services available for traditional voice calls (for example,
voice mailbox) are not available for PTT communication.
■ Connect and disconnect
To connect to the PTT service, select Menu > Push to talk > Switch PTT on.
indicates the PTT connection.
indicates that the service is temporarily
unavailable. The phone automatically tries to reconnect to the service until you
disconnect from the PTT service. If you have added channels to the phone, you are
automatically joined to the active channels, and the name of the default channel
is displayed in the standby mode.
To disconnect from the PTT service, select Switch PTT off.
■ Make and receive a PTT call
Set the phone to use the loudspeaker or earpiece for PTT communication. When
the earpiece is selected, use the phone normally by holding it to your ear.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
79
P u s h t o t a l k
When connected to the PTT service, you can make or receive channel calls, group
calls, or one-to-one calls. One-to-one calls are calls you make to only one person.
Press and hold the volume up key the entire time you are talking, and hold the
phone in front of you so that you can see the display. When you are finished,
release the volume up key. Talking is allowed on a first come, first served basis.
When someone stops talking, the first person to press the key used for PTT can
talk next.
To check the login status of your contacts, select Menu > Push to talk >
Contacts list. This service depends on your service provider and is only available
for subscribed contacts.
indicates the contact is available.
indicates the contact is not logged into the PTT service.
indicates the contact is unknown.
indicates the contact does not want to be disturbed. You cannot call the
contact, but you can send a callback request.
To subscribe a contact, select Options > Subscribe contact; or if one or more
contacts are marked, select Subscribe marked.
Make a channel or a group call
To make a call to the default channel, press the volume up key. A tone sounds,
indicating that the access is granted, and the phone displays your nickname and
channel name. See ”PTT channels,” p. 82.
To make a call to a nondefault channel, select Channel list in the PTT menu, scroll
to the channel you want, and press the volume up key.
To make a group call from Contacts, the recipients must be connected to the PTT
service. Select Menu > Contacts > Groups, scroll to the group you want, and
press the volume up key.
Make a one-to-one call
To start a one-to-one call from the list of contacts to which you added the PTT
address, select Contacts list. Scroll to a contact, and press the volume up key.
You can also select the contact from Contacts.
To start a one-to-one call from the list of PTT channels, select Channel list, and
scroll to the channel you want. Select Members, scroll to the contact you want,
and press the volume up key.
80
P u s h t o t a l k
To start a one-to-one call from the list of callback requests you have received,
select Callback inbox. Scroll to the contact you want, and press the volume up
key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients receive
an incoming call and must accept the call to participate.
Select Menu > Push to talk > Contacts list, and mark the contacts you want. To
make the call, press the volume up key. The contacts who accept the call are
shown.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Information such as the
channel name or the nickname (network service) of the caller is displayed.
If you have set the phone to first notify you of one-to-one calls, accept or reject
the call.
If you press the volume up key to try to respond to a call while another member is
talking, you hear a tone, and Queuing is displayed as long as you press the
volume up key. Press and hold the volume up key, and wait for the other person to
finish; then you can talk.
■ Callback requests
If you make a one-to-one call and do not get a response, you can send a request
for the person to call you back.
Send a callback request
You can send a callback request in the following ways:
•
•
•
To send a callback request from the contacts list in the Push to talk menu,
select Contacts list. Scroll to a contact, and select Options > Send callback.
To send a callback request from Contacts, search for the contact you want,
select Details, scroll to the PTT address, and select Options > Send callback.
To send a callback request from the channel list in the Push to talk menu,
select Channel list, and scroll to the channel you want. Select Members,
scroll to the contact you want, and select Options > Send callback.
81
P u s h t o t a l k
•
To send a callback request from the callback request list in the Push to talk
menu, select Callback inbox. Scroll to a contact, and select Options > Send
callback.
Respond to a callback request
When you receive a callback request, Callback request received is displayed in
the standby mode. Select View. The list of contacts who have sent you callback
requests is displayed.
•
•
•
•
•
To make a one-to-one call, press the volume up key.
To send a call request back to the sender, select Options > Send callback.
To delete the request, select Delete callback.
To view the sender's PTT address, select View.
To save a new contact or to add the PTT address to a contact, select Options >
Save as or Add to contact.
■ Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one calls in
the following ways:
•
•
•
To add a PTT address to a name in Contacts, search for the desired contact,
and select Details > Options > Add detail > PTT address.
To add a contact to the PTT contacts list, select Menu > Push to talk >
Contacts list > Options > Add contact.
To add a contact from the channel list, connect to the PTT service, select
Channel list, and scroll to the channel you want. Select Members, scroll to
the member whose contact information you want to save, and select Options.
To add a new contact, select Save as. To add a PTT address to a name in
Contacts, select Add to contact.
■ PTT channels
When you call a channel, all members joined to the channel hear the call
simultaneously.
There are three types of PTT channels:
Provisioned channel — A permanent channel created by the service provider.
82
P u s h t o t a l k
Public channel — Every channel member can invite other persons.
Private channel — Only persons who receive an invitation from the channel
creator can join in.
Add a channel
To add a public or private channel, select Menu > Push to talk > Add channel,
and edit the settings in the form fields:
Channel status: — Select Active or Inactive.
Chnl. nickname: — Enter your nickname for the channel.
Chnl. security: — Select Public channel or Private channel.
To send an invitation to the group, select Yes when the phone requests it. You can
send the invitation using MMS or infrared.
To add a provisioned channel, select Menu > Push to talk > Add channel >
Options > Edit add. manually. Enter the channel address provided by your
service provider.
Receive an invitation
When you receive a text message invitation to a group, Channel invitation
received: is displayed.
1. To view the contact who sent the invitation and the channel address if the
group is not a private channel, select View.
2. To add the channel to your phone, select Save.
3. To set the status for the channel, select Active or Inactive.
4. To reject the invitation, select View > Discard > Yes.
■ PTT settings
There are two kinds of PTT settings: settings for connecting to the service and
settings for use.
You may receive the settings for connecting to the service from your network
operator or service provider. See ”Configuration settings service,” p. 10. You can
enter the settings manually. See ”Configuration,” p. 68.
To select the settings for connecting to the service, select Menu > Push to talk >
Config. settings and one of the following options:
83
P u s h t o t a l k
Configuration — to select a service provider, Default, or Personal config. for PTT
service. Only the configurations that support the PTT service are shown.
Account — to select a PTT service account in the active configuration settings.
You can also select from other available options.
To edit the PTT settings for use, select Menu > Push to talk > PTT settings, and
one of the following options:
1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls.
To make but not receive one-to-one calls, select Off. The service provider may
offer some services that override these settings. To set the phone to first notify
you of incoming one-to-one calls with a ringing tone, select Notify.
PTT key default function > Open contact list, Open channel list,
Call contact/group, or Call PTT channel
Show my login status > Yes — to enable the sending of the login status
PTT status in startup > Yes or Ask first — to set the phone to automatically
connect to the PTT service when you switch on the phone
Push to talk when abroad — to switch the PTT service on or off when the phone
is used outside of the home network
Send my PTT address > No — to hide your PTT address from calls
84
O r g a n i z e r
14. Organizer
Your Nokia mobile phone has many useful features for organizing your everyday
life. The following features are found in Organiser: alarm clock, calendar, to-do
list, notes, countdown timer, and stopwatch.
■ Alarm clock
The alarm clock uses the time format set for the clock. The alarm clock works
even when the phone is turned off if there is enough power in the battery.
To set the alarm, select Menu > Organiser > Alarm clock > Alarm time, and
enter the alarm time. To change the alarm time when the alarm time is set, select
On. To set the phone to alert you on selected days of the week, select Repeat
alarm.
To select the alarm tone or set a radio channel as the alarm tone, select Menu >
Organiser > Alarm clock > Alarm tone. If you select the radio as an alarm tone,
connect the headset to the phone. The phone uses the last channel you listened
to as the alarm, and the alarm plays through the loudspeaker. If you remove the
headset or switch off the phone, the default alarm tone replaces the radio.
To set a snooze time-out, select Snooze time-out, and the time you want.
Alert tone and message
The phone sounds an alert tone, and flashes Alarm! and the current time on the
display, even if the phone is switched off. To stop the alarm, select Stop. If you let
the phone continue to sound the alarm for a minute, or select Snooze, the alarm
stops for the selected snooze time-out, then resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless phone
use may cause interference or danger.
■ Calendar
The calendar helps you keep track of reminders, calls that you need to make,
meetings, and birthdays.
85
O r g a n i z e r
Select Menu > Organiser > Calendar.
The current day is indicated by a frame in the month view. If there are any notes
set for the day, the day is in bold type. To view the day notes, select View. To view
a week, select Options > Week view. To delete all notes in the calendar, select
the month or week view and Options > Delete all notes.
Other options for the calendar day view are make a note; delete, edit, or move a
note; copy a note to another day; or send a note as a text message or multimedia
message to the calendar of another compatible phone. In Settings, you can set
the date and time settings. In the Auto-delete notes option, you can set the
phone to delete old notes automatically after a specified time.
Make a note
Select Menu > Organiser > Calendar, the date you want, and Options > Make a
note and one of the following note types:
Meeting,
Call,
Birthday,
Memo or
Reminder.
Note alarm
The phone beeps, and displays the note. If a call note appears, to call the
displayed number, press the call key. To stop the alarm and to view the note,
select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm
without viewing the note, select Exit.
■ To-do list
You can save a note for a task that you have to do, select a priority level for the
note, and mark it as done when you have completed it. You can sort the notes by
priority or by date.
To-do notes
1. Select Menu > Organiser > To-do list.
2. If no note is added, select Add note; otherwise, select Options > Add.
3. Write the note, select the priority, set the deadline and the alarm type for the
note, and select Save.
4. To view a note, scroll to it, and select View.
86
O r g a n i z e r
Options
You can also select an option to delete the selected note and delete all the notes
that you have marked as done. You can sort the notes by priority or by deadline,
send a note as a text message or a multimedia message to another phone, save a
note as a calendar note, or access the calendar.
While viewing a note, you can also select an option to edit the deadline or
priority for the note, or mark the note as done.
■ Notes
Use Notes to write and send notes to compatible devices by using SMS or MMS.
1. Select Menu > Organiser > Notes.
2. To make a note if one is not added, select Add note; otherwise, select
Options > Make a note.
3. Write the note, and select Save.
4. To view a note, scroll to it, and select View.
Options
Other options for notes include deleting and editing a note. While editing a note,
you can also exit the text editor without saving the changes. You can send the
note to compatible devices through infrared, text message, or a multimedia
message.
■ Countdown timer
1. Select Menu > Organiser > Timer> Normal timer; enter the alarm time in
hours, minutes, and seconds; and select OK.
You can write your own note text, which will display when the time expires.
2. To start the timer, select Start.
3. To change the countdown time, select Change time.
4. To stop the timer, select Stop timer.
If the alarm time is reached when the phone is in the standby mode, the phone
sounds a tone and flashes the note text (if it is set) or Countdown time up. Stop
the alarm by pressing any key. If no key is pressed, the alarm automatically stops
87
O r g a n i z e r
within 60 seconds. To stop the alarm and to delete the note text, select Exit. To
restart the countdown timer, select Restart.
■ Stopwatch
You can measure time, take intermediate times, or take lap times using the
stopwatch. During timing, the other functions of the phone can be used. To set
the stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select Menu > Organiser > Stopwatch and one of the following options:
Split timing — to take intermediate times
•
•
•
•
•
To start the time observation, select Start.
To take an intermediate time, select Split.
To stop the time observation, select Stop.
To save the measured time, select Save.
To start the time observation again, select Options > Start. The new time is
added to the previous time.
•
•
To reset the time without saving it, select Options > Reset > Yes.
To set the stopwatch timing in the background, press the end key.
Lap timing — to take lap times. To set the stopwatch timing in the background,
press the end key.
Continue — to view the timing that you have set in the background
Show last — to view the most recently measured time if the stopwatch is not
reset
View times or Delete times — to view or delete the saved times
88
A p p l i c a t i o n s
15. Applications
■ Games
Your phone software includes some games.
Launch
Select Menu > Applications > Games, scroll to the game you want, and select
Open.
For options related to a game, see ”Other application options,” p. 89.
Downloads
Select Menu > Applications > Options > Downloads > Game downloads. The
list of available bookmarks is shown.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Settings
To set sounds, lights, and shakes for the game, select Menu > Applications >
Options > App. settings.
■ Collection
Your phone software includes some Java applications, such as a calculator.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Launch an application
Select Menu > Applications > Collection; scroll to an application; and select
Open, or press the call key.
Other application options
Delete — to delete the application or application set from the phone
89
A p p l i c a t i o n s
Details — to give additional information about the application
Update version — to check if a new version of the application is available for
download from the Web (network service)
App. access — to restrict the application from accessing the network. Different
categories are shown. Select in each category one of the available permissions.
Web page — to provide further information or additional data for the application
from an Internet page (network service). It is only shown if an Internet address
has been provided with the application.
Download applications
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Your phone supports J2ME Java applications. Make sure that the application is
compatible with your phone before downloading it (network service).
You can download new Java applications in different ways:
•
Select Menu > Applications > Options > Downloads > App. downloads, and
the list of available bookmarks is shown.
For the availability of different services, pricing, and tariffs, contact your
service provider.
•
•
Use the game download function. See ”Downloads,” p. 89.
Use the Nokia Application Installer from Nokia PC Suite to download the
applications to your phone.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
90
W e b
16. Web
Your phone has a built-in browser you can use to connect to selected services on
the mobile Internet. Many wireless mobile Internet access features are network-
dependent, and some features may not be available. Contact your service
provider for more information.
■ Technology background
A technology called wireless application protocol (WAP) is to mobile devices
what the world wide web (WWW) is to personal computers. The mobile
community began developing WAP several years ago to provide access to the
Internet for mobile users.
Most WAP sites are made up of text and hyperlinks. Some pages even contain
low-resolution graphics, or require data input. Your service provider and others
are free to design WAP sites as they choose, so the sites are as varied as the web
pages on the Internet.
Internet content on your personal computer is called a web page. Internet
content on your mobile phone is called a page, WAP card, or a deck of cards. You
may not be able to view all the details of the mobile Internet pages, as page
appearance may vary due to screen size.
■ Service provider
Because mobile Internet content is designed to be viewed from your phone, your
service provider is now your mobile Internet service provider as well. It is likely
that your service provider has created a home page and set up your WAP browser
to go to this page when you log on to the mobile Internet. Once at your service
provider’s home page, you may find links to a number of other sites.
■ Access service
Set up service
You may receive the configuration settings required for browsing as a
configuration message from the network operator or service provider that offers
the service that you want to use. See ”Configuration settings service,” p. 10. You
can also enter all the configuration settings manually. See ”Configuration,” p. 68.
91
W e b
Activate the settings
Ensure that the Web settings of the service you want to use are activated.
1. Select Menu > Web > Settings > Configuration settings > Configuration.
Only the configurations that support the browsing service are shown.
2. Select a service provider or Personal config. for browsing.
3. Select Account and a browsing service account contained in the active
configuration settings.
4. If you want to perform manual user authentication for intranet connections,
select Display terminal window > Yes.
Connect to a service
There are several ways to connect to a service.
•
To open the service’s home page, select Menu > Web > Home; or in the
standby mode, press and hold 0.
•
•
•
To select a bookmark, select Menu > Web > Bookmarks.
To select the last viewed web site, select Menu > Web > Last web address.
To enter the address of the service, select Menu > Web > Go to address,
enter the address of the service, and select OK.
■ Browse
It should not be necessary to manually configure the browser on your phone.
Normally this is done by your service provider once you have subscribed to the
feature. Contact your service provider if you have problems using the browser.
After you make a connection to the service, you can start browsing its pages. The
function of the phone keys may vary in different services. Follow the text guides
on the phone display. For more information, contact your service provider.
If EGPRS or GPRS is selected as the data bearer, either
top left of the display during browsing. If you receive a call or a text message, or
make a call during an EGPRS or GPRS connection, or is shown in the top
or
is shown in the
right of the display to indicate that the EGPRS or GPRS connection is suspended
(on hold). After a call, the phone tries to reconnect the EGPRS or GPRS
connection.
92
W e b
Phone keys
•
•
•
•
To browse through the page, press the scroll key in any direction.
To select a highlighted item, press the call key.
To enter letters and numbers, press the keys, 0 to 9.
To enter special characters, press *.
Options
Beside the options available on your device, your service provider may offer other
options.
Direct calling
The browser supports functions that you can access while browsing. You can
make a phone call or save a name and a phone number from a page.
Appearance settings
While browsing, select Options > Other options > Appear. settings; or in the
standby mode, select Menu > Web > Settings > Appearance settings and one of
the following options:
Text wrapping > On — to set the text to continue on the next line in the display.
If you select Off, the text is abbreviated.
Font size — to set the font size for mobile Internet pages
Show images > No — to hide pictures on the page. This can speed up the
browsing of pages that contain a lot of pictures.
Alerts > Alert for unsecure connection > Yes — to set the phone to alert when a
encrypted connection changes to an unencrypted one during browsing
Alerts > Alert for unsecure items > Yes — to set the phone to alert when a
encrypted page contains an unsecure item. These alerts do not guarantee a
secure connection. For more information, see ”Browser security,” p. 96.
Character encoding > Content encoding — to select the encoding for the
browser page content
93
W e b
Character encoding > Unicode (UTF-8) web addresses > On — to set the phone
to send a URL as a UTF-8 encoding. You may need this setting when you access a
web page created in a foreign language.
Screen size > Full or Small— to set the screen layout
JavaScript > Enable — to enable the Java scripts
■ Security settings
Cookies
A cookie is data that a site saves in the cache memory of your phone. Cookies are
saved until you clear the cache memory. See ”Cache memory,” p. 95.
While browsing, select Options > Other options > Security > Cookie settings; or
in the standby mode, select Menu > Web > Settings > Security settings >
Cookies. To allow or prevent the phone receiving cookies, select Allow or Reject.
Scripts over secure connection
You can select whether to allow the running of scripts from a secure page. The
phone supports WML scripts. While browsing, select Options > Other options >
Security > WMLScript sett.; or in the standby mode, select Menu > Web >
Settings > Security settings > WMLScripts over secure connection. To allow
the scripts, select Allow.
■ Bookmarks
You can save page addresses as bookmarks in the phone memory.
1. While browsing, select Options > Bookmarks; or in the standby mode, select
Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it; or press the call key to make a connection
to the page associated with the bookmark.
3. Select Options to view, edit, delete, or send the bookmark; create a new
bookmark; or move the bookmark to a folder.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
94
W e b
Receive
When you have received a bookmark that is sent as a bookmark, 1 bookmark
received is displayed. The received bookmark is saved automatically to
Bookmarks. To view it, select Show > Bookmarks.
■ Download settings
To automatically save all downloaded files in the Gallery, select Menu > Web >
Settings > Downloading settings > Automatic saving > On.
■ Service inbox
The phone is able to receive service messages (pushed messages) sent by your
service provider (network provider). Service messages are notifications (for
example, news headlines). These messages may contain a text message or an
address of a service.
To access the Service inbox in the standby mode when you have received a
service message, select Show. If you select Exit, the message is moved to the
Service inbox. To access the Service inbox later, select Menu > Web > Service
inbox.
Settings
Select Menu > Web > Settings > Service inbox settings.
To set whether you want to receive service message, select Service messages >
On or Off.
To set the phone to receive service messages only from content authors approved
by the service provider, select Message filter > On. To view the list of the
approved content authors, select Trusted channels.
To set the phone to automatically activate the browser from the standby mode
when the phone has received a service message, select Automatic connection >
On. If you select Off, the phone activates the browser only after you select
Retrieve when the phone has received a service message.
■ Cache memory
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
95
W e b
empty the cache after each use. The information or services you have accessed is
stored in the cache.
To empty the cache, while browsing, select Options > Other options > Clear the
cache.
To empty the cache, while in the standby mode, select Menu > Web > Clear the
cache.
■ Browser security
Security features may be required for some services, such as online banking or
shopping. For such connections, you need security certificates and possibly a
security module, which may be available on your SIM card. For more information,
contact your service provider.
Security module
The security module improves security services for applications requiring a
browser connection, and allows you to use a digital signature. The security
module may contain certificates as well as private and public keys. The
certificates are saved in the security module by the service provider.
Select Menu > Settings > Security > Security module settings and one of the
following options:
Security module details — to show the security module title, manufacturer, and
serial number
Module PIN request — to set the phone to ask for the module PIN when using
services provided by the security module. Enter the code, and select On. To
disable the module PIN request, select Off.
Change module PIN — to change the module PIN, if allowed by the security
module. Enter the current module PIN code, then the new code twice.
Change signing PIN — to change the signing PIN code for the digital signature.
Select the signing PIN you want to change. Enter the current PIN code, then the
new code twice.
See also ”Access codes,” p. 9.
96
W e b
Certificates
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller,
they must be used correctly in order to benefit from increased security.
The existence of a certificate does not offer any protection by itself; the
certificate manager must contain correct, authentic, or trusted
certificates for increased security to be available. Certificates have a
restricted lifetime. If Expired certificate or Certificate not valid yet is
shown even if the certificate should be valid, check that the current
date and time in your device are correct.
Before changing any certificate settings, you must make sure that you
really trust the owner of the certificate and that the certificate really
belongs to the listed owner.
There are three kinds of certificates: server certificates, authority certificates, and
user certificates. You may receive these certificates from your service provider.
Authority certificates and user certificates may also be saved in the security
module by the service provider.
To view the list of the authority or user certificates downloaded into your phone,
select Menu > Settings > Security > Authority certificates or User certificates.
The security indicator is displayed during a connection, if the data
transmission between the phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. The service provider secures the data transmission between the
gateway and the content server.
Digital signature
You can make digital signatures with your phone if your SIM card has a security
module. Using the digital signature can be the same as signing your name to a
paper bill, contract, or other document.
To make a digital signature, select a link on a page, such as the title of the book
you want to buy and its price. The text to sign is displayed, which may include the
amount and date.
Check that the header text is Read and that the digital signature icon
is
shown.
97
W e b
If the digital signature icon does not appear, there is a security breach, and you
should not enter any personal data such as your signing PIN.
To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll through
and read all of the text before signing.
Select the user certificate you want to use. Enter the signing PIN (see ”Access
codes,” p. 9), and select OK. The digital signature icon disappears, and the service
may display a confirmation of your purchase.
98
S I M s e r v i c e s
17. SIM services
Your SIM card may provide additional services that you can access. This menu is
shown only if it is supported by your SIM card. The name and contents of the
menu depend on the SIM card.
For availability, rates, and information on using SIM services, contact your
service provider.
To set the phone to show you the confirmation messages sent between your
phone and the network when you are using the SIM services, select Menu >
Settings > Phone > Confirm SIM service actions > Yes. This option is shown
only if supported by your SIM card.
To access these services, it may be necessary to send messages or make a phone
call for which you may be charged.
99
P C c o n n e c t i v i t y
18. PC connectivity
You can access the Internet when your phone is connected to a compatible PC
through an IR or USB data cable connection. You can use your phone with a
variety of PC connectivity and data communications applications.
■ USB data storage
You can use the USB data cable to transfer data between the memory card
inserted in the phone and a compatible PC. See ”USB data cable,” p. 65. After
transferring data, ensure that it is safe to unplug the USB data cable from the PC.
■ Nokia PC Suite
With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do
notes between your phone and the compatible PC or a remote Internet server
(network service). You may find more information and PC Suite on the Nokia Web
site at www.nokia.com/support.
■ EGPRS, HSCSD and CSD
With your phone you can use the general packet radio service (GPRS), enhanced
GPRS (EGPRS), circuit switched data (GSM data) services, high speed circuit
switched data (HSCSD).
For availability and subscription to data services, contact your network operator
or service provider.
The use of HSCSD services consumes the phone battery faster than normal voice
or data calls. You may need to connect the phone to a charger for the duration of
data transfer.
See ”Packet data settings,” p. 63.
■ Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
100
P C c o n n e c t i v i t y
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
101
B a t t e r y i n f o r m a t i o n
19. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, replace the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers designated for this
device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger and
then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
102
B a t t e r y i n f o r m a t i o n
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery is
not an authentic original Nokia battery, you should refrain from using it and take
it to the nearest authorized Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements
logo when looking from another angle.
2. When you angle the hologram left, right, down, and
up, you should see 1, 2, 3, and 4 dots on each side
respectively.
3. Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210. Turn
the battery so that the numbers are facing upwards.
The 20-digit code reads starting from the number at
the top row followed by the bottom row.
103
B a t t e r y i n f o r m a t i o n
4. Confirm that the 20-digit code is valid by following
the instructions at www.nokia.com/batterycheck.
To create a text message, enter the 20-digit code, for example,
12345678919876543210, and send to +44 7786 200276.
National and international operator charges will apply.
You should receive a message indicating whether the code can be authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is
an authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
104
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
•
Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•
•
Use chargers indoors.
Always create a backup of data you want to keep (such as contacts and
calendar notes) before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
105
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters (7/8 inches) from the
body. When a carry case, belt clip or holder is used for body-worn operation, it
should not contain metal and should position the device the above-stated
distance from your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
106
A d d i t i o n a l s a f e t y i n f o r m a t i o n
•
Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker
•
•
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you suspect interference, switch off your device, and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
107
A d d i t i o n a l s a f e t y i n f o r m a t i o n
depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
■ Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the
device.
2. Press the end key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider for
more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
108
A d d i t i o n a l s a f e t y i n f o r m a t i o n
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.73 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at www.nokia.com.
109
I n d e x
Index
A
D
access codes 9
active standby 20, 58
alarm clock 85
antenna 16
data communication 100
downloads
settings 95
B
E
battery 102
authentication 103
charge 13
I
strength indicator 19
bookmarks 94
browser 92
infrared 62
instant messaging 36
business cards 49
K
C
keyguard 22
keys and parts 18
calendar 85
call
answer 25
end 24
M
maintenance 105
media player 74
memory card
format 72
log 53
make 24
options 25
reject 25
installation 14
slot 18
voice mail 42
waiting 25
camera
menus 27
messages
lens 18
use 73
audio 35
flash 34
charging 102
contacts
info 43
multimedia 31
SIM 31
add 47
copy 48
delete 48
delete details 48
edit 48
memory in use 51
my numbers 52
search 47
service numbers 52
templates 34
text 28
voice 42
music player 74
my shortcuts 57
N
network services 7
notes 87
110
inbox 95
O
settings
operator
call 65
logo 55
enhancement 67
message 43
menu 71
modem 63
P
packet data 100
PC Suite 100
restore factory 69
security 68
phone software updates 69
plug and play service 15
profiles 54
time and date 57
tones 54
shared memory 8
SIM card 12
PTT. See push to talk
push to talk
stereo widening 78
summary after call 66
synchronization 64
callback requests 81
channel call 80
channels 82
connect 79
disconnect 79
group call 80
T
make and receive calls 79
one-to-one call 80
settings 83
text entry 28
themes 54
to-do list 86
R
U
radio 76
user guide updates 10
S
V
safety 106
certification information 108
emergency calls 108
explosive environments 107
hearing aids 107
medical devices 106
pacemakers 106
vehicles 107
voice commands 58
W
wallpaper 55
WLAN/Wi-Fi 59
wrist strap 17
screen saver 21
service
l
commands 43
111
|