LCDVD152UK
USER’S GUIDE
Packaging
If you can store the packaging it will prove useful should you need to transport the
TV to protect it while it is in transit. Try to reuse packaging wherever you can. If you
cannot store it, contact your local authority for details of your nearest recycling
facilities.
Installation
We strongly recommend that this product is installed by qualified personnel with
enough skill and competence. The seller cannot assume liabilities for damage
caused by mistake in installation, mounting, misuse or modification.
This symbol on the product or in the instructions means that
your electrical and electronic equipment should be disposed
at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or
your retailer where you purchased the product.
The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
The apparatus shall be connected to a MAINS socket outlet
with a protective earthing connection.
The MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
CONTENT
ACCESSORIES -----------------------------------------------------------------
FRONT PANEL BUTTONS---------------------------------------------------
BACK PANEL OVERVIEW---------------------------------------------------
BRIEF FOR BACK TERMINALS-----------------------------------
REMOTE CONTROL-----------------------------------------------------------
REMOTE CONTROL BUTTON FUNCTIONS ------------------
CONFIGURATION OF THE LCD--------------------------------------------
POWER ON/OFF-------------------------------------------------------
INSTALLATION GUIDE-----------------------------------------------
CHANNEL MENU-------------------------------------------------------
AUTO TUNING----------------------------------------------------
DTV MANUAL TUNING----------------------------------------
1
2
3
4
5
6
7
7
7
8
8
9
ATV MANUAL TUNING-----------------------------------------
10
11
12
13
14
15
16
17
17
18
18
19
20
21
28
29
PROGRAM EDIT-------------------------------------------------
PICTURE MENU--------------------------------------------------------
SOUND MENU----------------------------------------------------------
TIME MENU--------------------------------------------------------------
OPTION MENU---------------------------------------------------------
LOCK MENU-------------------------------------------------------------
EPG MENU--------------------------------------------------------
FAST CHANNEL LIST------------------------------------------
INPUT SOURCE-------------------------------------------------
FAVORITE LIST--------------------------------------------------
SUBTITLE LANGUAGE----------------------------------------
TECHNICAL SPECIFICATION LCD TV-----------------------------------
DVD OPERATION----------------------------------------------------------------
SAFETY PRECAUTIONS------------------------------------------------------
CARE AND MAINTENANCE--------------------------------------------------
ACCESSORIES
ACCESSORIES
Thank you for purchasing this LCD-TV.
This LCD-TV package comes with:
User’s Guide book
Remote control
Battery AAAx 2
Adapter
Power Cord/External Power Supply
Warranty Card x 1
OPTIONAL ACCESSORIES
You can purchase these optional accessories for your LCD TV:
HDMI Cable
AV Cable
SCART Cable
VGA Cable
Audio Cable
Please save your packaging as you will need this in the event of
warranty/service repair or support. We are unable to carry out
warranty/service if you are unable to package it correctly. The safest
way to package your item in the event of warranty/service repair is in
its original box/packaging.
FRONT PANEL BUTTONS
10
1
2
3
4
5
6
7
POWER
SOURCE
MENU
CH+
CH-
VOL+
8
VOL-
9
1
Power ON/OFF
Select the input source:DTV/TV/SCART/YPBPR/DVD/PC-RGB/HDMI/AV
OSD (ON Screen Display) Menu
2
3
4
Channel Up/Scroll up
5
Channel Down/Scroll down
Volume Up/Right orientation
6
7
Volume Down/Left orientation
Remote Sensor
8
9
Indicator Light
DVD Button
10
BACK PANEL OVERVIEW
DC 12V
HDMI
A
B
VGA
C
D
SCART
VGA
AUDIO
IN
E
F
Y
PB
PR
VIDEO
G
H
L
R
RF
I
Power input
DC 12V
HDMI
A
B
C
D
E
F
G
H
I
HDMI input
VGA input
VGA
SCART input
Audio input
YPBPR input
VIDEO input
SCART
VGA AUDIO IN
YPBPR
VIDEO
L/R
Audio input for Video and Y/PB/PR
Antenna input
RF
BRIEF FOR BACK TERMINALS
Power
Supply
Adapter
DC 12V
HDMI
HDMI
VGA
SCART
SCART
VGA
AUDIO
IN
Y
PB
PR
VIDEO
L
R
L
R
RF
Y
PB
PR
VIDEO Audio Out
Don’t remove the cable
between Indoor antenna
(TV RF) and Outdoor
antenna (DVB R F-OUT)
REMOTE CONTROL
1
3
2
i
6
8
4
NICAM
SOURCE
VOL
CH
5
9
7
10
OK
11
13
MENU
EXIT
12
FAV
EPG
SUBT
PGDN
LIST
17
16
14
15
TEXT HOLD
PGUP
DVD
21
20
18
19
INDEX SIZE REVEAL SUBPAGE
25
24
22
23
REPEAT ANGLE
L/R
SET UP
P-MODE
26
27
29
28
SLEEP TV-RADIO AUDIO
30
31
33
32
REMOTE CONTROL BUTTON FUNCTIONS
POWER
MUTE
0-9
The power key to switch On and Off of the power
1
2
Press once to turn off the sound, once again to restore the sound
Select TV channels in TV mode
To display system information
3
i
4
To adjust the sound volume
VOL+/-
5
In TV mode, press this key to come back to the previous TV channel
6
NICAM
CH+/-
To select sound modes
7
To select the previous or next TV channel
To cycle through the input source:DTV/TV/SCART/YPBPR/DVD/PC-RGB/HDMI/AV
To move the cursor and select the option needed
To confirm the selected option
8
SOURCE
9
10
11
12
13
14
15
16
17
18
19
20
21
OK
MENU
EXIT
To open the system setting menu of the LCD Display
In the TV menu mode, press this key to return to the upper menu
To select and store channels of favorite program
To open EPG menu
FAV
EPG
To open and close subtitles on DVB
SUBT
LIST
To display the TV program list
To open the function of TELETEXT or remove the disc
To select the lock-on function of TEXT/Stop the DVD disc
To select TEXT for viewing the next pagep/ lay or pause the DVD disc
To select TEXT for viewing the previous page/return to the DVD main menu
TEXT/
HOLD/
PGDN/
PGUP/DVD
To select and return to the main directory of TEXT/skip to the
previous chapter or track
INDEX/
SIZE/
22
23
To zoom in and out for the display of the TEXT/skip to the next
chapter or track
To select the hidden TEXT function/backward scene with faster speed
To open the TEXT function of sub-page/foward scene with faster speed
REVEAL/
24
25
SUBPAGE/
To select the corresponsive TELETEXT page after entering the homepage
of TELETEXT/cycle through the options: Chapter, Title, All and nothing
RED/REPEAT
GREEN/ANGLE
YELLOW/AUDIO
CYAN/SETUP
26
27
28
29
To select the corresponsive TELETEXT page after entering the
homepage of TELETEXT/select multiple angles
To select the corresponsive TELETEXT page after entering the
homepage of TELETEXT/select desired audio track
To select the corresponsive TELETEXT page after entering the
homepage of TELETEXT/open and close the DVD OSD menu
Select sleep time
SLEEP
30
31
32
33
When watching a channel, allows you to switch between TV and Radio modes.
To display audio language.
TV-RADIO
AUDIO
Select picture mode
P-MODE
CONFIGURATION OF THE LCD
Note: generally, you can press MENU to return to previous menu, and EXIT to
exit the menu, it is a default option.
POWER On/Off
Plug the TV into a standard outlet, making sure the output voltage and frequency
corresponds to the requirement of your machine.
When the power supply is connected, the red indicator on the front panel will be on and the
machine turns into standby state.
Push the POWER button on your remote control the indicator on the front panel will
change from red to green. And after several seconds, the system will enter the state
previously selected when it was used last time.
When finish watching, push the POWER button on your remote control to return the TV to
standby mode, The green light will change to red.
Unplug the power.
Installation Guide
- Press to select the OSD language, then press to select Auto Tuning.
Refer page 8 “Auto Tuning”.
CONFIGURATION OF THE LCD
Channel Menu
- Press MENU to display the OSD menu to select the menu Channel.
- Press
to select the selection, or OK to confirm.
- Press MENU to return to previous menu.
- Press EXIT to exit the menu.
Auto Tuning
- Press
to select the country, then OK to confirm.
CONFIGURATION OF THE LCD
- Press to select start highlight. Press OK key to start Auto Tuning.
- Press <Menu> to skip the current tuning (ATV or DTV).
- Press <Exit> to return to the previous menu.
DTV Manual Tuning
- Press
to select the channel, then OK to search.
CONFIGURATION OF THE LCD
ATV Manual Tuning
- Press to select the selection,
the following suboptions.
to adjust the option as requirement. See details in
- Press SAVE (RED) to save the channel.
Storage To
- Press
System
- Press
to select the channel number you want to save to.
to select the system.
Current CH
- Press
Search
- Press
Fine-Tune
to select the current channel.
to search backward/forward, MENU or EXIT to stop the searching.
to fine tuning when the signal of the current channel is weak.
- Press
Skip
- Press to turn on/off the switch of skip. When the switch is turned on, the current
channel will be skipped when you scan channels with P+/P- button.
CONFIGURATION OF THE LCD
Program Edit
TV
1
S-02
TV
TV
TV
2
3
4
C-42
S-03
S-04
DELETE
RENAME
MOVE
SKIP
FAV
Delete
- Press
channel will be marked DELETE, press DELETE (RED) again to delete, or MENU to cancel.
to select the channel you want to delete, then press DELETE (RED), and the
Rename(only for ATV)
- Press
will be marked RENAME, then press
the letter you want.
to select the channel you want to rename, press RENAME (GREEN), the channel
to select the position of word, press
to select
Move
- Press to select the channel you want to move, then press MOVE (YELLOW), and the
channel will be marked MOVE, press MOVE (YELLOW) again to move, or MENU to cancel.
Skip
- Press
to select the channel you want to skip, then press SKIP (CYAN) to mark or
dismark the channel. The channel marked SKIP will be skipped when you scan channels
with CH+/CH- button.
Favorite
- Press to select your favorite channel, then press FAV to mark or dismark the channel.
The channel marked FAV will be storage to the favorite list.
CONFIGURATION OF THE LCD
Picture Menu
- Press MENU to display the OSD menu
to select the menu PICTURE, to enter the submenu.
- Press MENU to return to the main menu from the submenu.
Picture Mode
- Press
to select Picture Mode. Dynamic, Standard, Mild, User.
Contrast
- Press
- Press
to adjust the contrast.
Brightness
to adjust the brightness.
Color
- Press
to adjust the color.
Sharpness
- Press
to adjust the sharpness.
Color Temperature
- Press
to select Color Temperature. Cool, User, Warm, Medium.
Aspect Ratio
- Press
to select Aspect Ratio. Zoom1, Zoom2, Auto, 4:3, 16:9.
Noise Reduction
- Press
to open or close Noise Reduction.
CONFIGURATION OF THE LCD
Sound Menu
- Press MENU to display the OSD menu
to select the menu SOUND, to enter the submenu.
- Press MENU to return to the main menu from the submenu.
Sound Mode
- Press to select sound mode. Standard, Music, Movie, Sports, User. Press MENU to confirm
and return to preview menu.
Treble
- Press
to adjust the treble.
to adjust the bass.
to adjust the balance.
Bass
- Press
Balance
- Press
Auto Volume
- Press
to select off or on.
Surround Sound
- Press
to select off or on.
CONFIGURATION OF THE LCD
Time Menu
- Press MENU to display the OSD menu,
to select the menu TIMER,
to enter the submenu.
- Press MENU to return to the main menu from the submenu.
Clock
- Press to select hour or minute, press
setup the time.
to
Off Time
- Press
item, use
the TV to be turn off.
to select on,
to enter the setup
to setup the time you want
OnTime
- Press
use
be turn on.
to select on, to enter the setup item,
to setup the time you want the TV to
CONFIGURATION OF THE LCD
Sleep Timer
- Press
to select timer.
Auto Standby
- Press
to select standby on or off.
Option Menu
- Press MENU to display the OSD menu,
to select the menu OPTION, to enter the submenu.
- Press MENU to return to the main menu from the submenu.
Language
- Press
to select the OSD language.
Hearing Impaired
- Press
- Press
to On/Off the OSD Hearing Impaired.
Restore Factory Default
restore factory default.
CONFIGURATION OF THE LCD
Lock Menu
- Press MENU to display the OSD menu,
to select the menu Lock, to enter the submenu.
- Press MENU to return to the main menu from the submenu.
- Press
enter Password is “0000”.
Lock Channel
- Press
to select off or on.
Set password
- Press
display please enter password new password and confirm.
Block Program
- Press
display to enter Block Program, press Lock (GREEN).
CONFIGURATION OF THE LCD
EPG Menu
- Use EPG button on the remote control to display the EPG menu directly as below:
-Press DATE (YELLOW) to enter Date Option, press
to select Date.
Fast Channel List
- Press LIST button on the remote control to display the channel List.
CONFIGURATION OF THE LCD
Input Source
- Press SOURCE to display the OSD input source,
to select the menu source.
TV
SCART
YPBPR
DVD
PC-RGB
HDMI
AV
Favorite List
Favorite List
DTV 800 SZTVM01
DTV 801 SZTVM02
- Press FAV button on the remote control to display the Favorite List.
CONFIGURATION OF THE LCD
Subtitle Language
Subtitle Language
Off
TTX
English
- Press SUBT button on the remote control to display the Subtitle Language.
Audio Language
Audio Language
MPEG
DOLBY
CE
L
R
English
UND
- Press NICAM button on the remote control to display Audio Language. If there are several
language, you can use button to select the language.
TECHNICAL SPECIFICATION LCD TV
Type
15.6’’
LCD
Horizontal frequency:20-70KHz
Vertical frequency:60Hz
PC-RGB
RF
75 ohm Antenna/PAL-SECAM/DVB-T
1 AV/Composite RCA,1 YPBPR
1 SCART
Input Signal
Video
1 pair 3.5mm Phone Jack for PC
1 pair RCA for AV
Audio
1 HDMI
1366X768
2X2W
HDMI
Resolution
Recommended
Speaker Output
Power
Adapter Output
Voltage
Voltage
12V DC
4.0A
Power
Adapter Input
AC 100-240V 50/60Hz 1.0A
250 cd/m2
500:1
Brightness
Contrast
400mm(W)X142mm(D)X315mm(H)
3.3Kg
Dimensions Physical
Weight Net
SAFETY PRECAUTIONS
This LCD TV is manufactured and tested to ensure the user s safety. Improper
use or installation may result in danger to the LCD TV as well as to the user.
Carefully adhere to the following warnings and keep this user guide to hand for
future reference.
WARNINGS
This LCD TV should be operated only at the correct power sources indicated in
the label . If you’ re unsure of the power supply in your residence, consult your
local dealer or service center.
Do not try to repair the LCD TV yourself as it contains no user-serviceable parts.
The LCD TV should only be repaired by a qualified technician.
Do not remove the LCD TV cabinet. There are high-voltage parts inside that may
cause electric shock. Even when the power cord is disconnected.
Stop using the LCD TV if the cabinet is damaged. Have it checked by a service
technician.
Put your LCD TV only in a clean, dry environment. Unplug the LCD TV immediately
if gets wet and consult your service technician.
Always unplug the LCD TV before cleaning it. Clean the cabinet with a clean, dry
cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass
screen.
Keep the LCD TV away from magnetic objects, motors, TV sets, and transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed near the
equipment and shall be easily accessible.
CARE AND MAINTENANCE
Care
Avoid exposing your LCD TV directly to sunlight other heat source.
Place your LCD TV away from the sun to reduce glare.
Put your LCD TV in a well ventilated area. Do not place anything heavy on top
of your LCD TV.
Make certain your LCD TV is installed in a clean and moisture-free area.
Keep your LCD TV away from magnets, motors, transformers, speakers, and other
TV sets.
Safety Tips
In the event of smoke, abnormal noise or order coming from your LCD TV, remove
the power cord immediately and consult your service center.
CAUTION-Never remove the rear cover of your LCD TV cabinet.
Never try to repair your LCD TV yourself. Always call your service center or a
qualified technician to carry out repairs.
TROUBLESHOOTING
No power
Make sure A/C power cord is securely connected.
Plug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
Power on but no screen image
Make sure the video cable supplied with the TV is tightly secured to the video
output port on back of video source (DVD,VCR) If not, tightly secure it.
Adjust brightness.
Make sure all signal cables are installed.
Wrong or abnormal colors
If any colors (red,green,blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
Connect the TV unit to another video source or use another Tvs to make
sure the video source was not causing the problem.
Pixel Guarantee
The pixel guarantee applicable for this device is ISO 134062 Class 2 Standard.
Accessories Guarantee
Accessories are not guaranteed.
202750323
|
Cobra Electronics Marine Radio MR HH330 User Manual
Conair Styling Iron CS41CS User Manual
Cub Cadet Chipper CS3210 User Manual
Cypress Computer Hardware CY14B102L User Manual
Dixon Lawn Mower Accessory 539130211 User Manual
Ducane HVAC Air Conditioner 2SG13B User Manual
DXG Technology Camcorder DXG 599V User Manual
Extron electronic Stereo Amplifier HPA 1001 70V User Manual
Fisher Price Motorized Toy Car R9543 User Manual
Fortinet Network Hardware 5103b User Manual